Our tip down drawer system utilises low-weight high-strength plastics to create a robust front bracket to support a pull out and tip down stowage drawer. The front bracket has an integral block wedge and locking socket which hold the drawer firmly in position when closed. The rear of the tip down drawer is mounted on a slider with an integral pivot plate. This slider and pivot plate is in turn mounted inside an aluminium rail. The rail end stops are robustly designed in milled aluminium with front mounted die springs for shock absorption. The rail can be mounted at varying angles to achieve the vehicle engineer's desired slide and tilt motion.
The system is designed to offer flexibility and modularity, with the front bracket and supporting pivot plate being standard components. These components are available in different colours. The vehicle engineer is able to specify different rail lengths according to compartment depth.
Whilst the system is generally strong enough to handle a 90KG drawer load, Health and Safety legislation and safe working practices in relation to lifting loads will generally restrict operating loads to 35Kgs per person. Sold per complete set of RH & LH components, fully assembled with rails drilled ready for use.
The D3000 lightweight locking handle has been designed to compliment our tilting drawers, securing them in the closed position.