Sliding Systems has entered into a new distribution agreement with Regout Balance...
This highly visible red latch is used to hold close small drawers and compartments. It clicks positively into the stowed position and retains in position. Often used with or without drawer slides, or where the container is to be detached from the chassis. Robust moulded zinc construction which easily bolts on the front of the drawer frame. Holds securely in four positions.
Access all information by swiping the tabs below
This highly visible red latch is used to hold close small drawers and compartments. It clicks positively into the stowed position and retains in position. Often used with or without drawer slides, or where the container is to be detached from the chassis. Robust moulded zinc construction which easily bolts on the front of the drawer frame. Holds securely in four positions.
Following thorough research in house and at our manufacturing facilities we can offer a slide which is particularly suited to aircraft seating. The full aerospace range is fitted with cross roller bearings, due avoid any effect of brinelling.
The 5220 Radial Slide (140-154kg/pair) is made from high strength aircraft allows which has be rigorously tested to outperform standard ball bearing models.
The T6 aircraft grade aluminium beams have milled race tracks for tolerance. The surface finish is black hardened anodised as standard, other finishes are available on request.
The cross-roller bearings are made from precision hardened steel and chromed rods, it is possible to fit them with Delrin if the project requires light weight, performing slides.
7075 -T6 aluminium provides a high strength material, commonly used in aircraft fittings with a Rockwell A hardness 53.5 and an ultimate tensile strength of 572 Mpa.
The 450mm length with a 480mm travel has been independently (cyclically and abuse) tested to 60,000 cycles with a 100kg load, passing all criteria for aircraft seating use.
Cashpoint machines and other electronic machines for cash handling and delivery of customer services as well as in-branch furniture and desking.
Light duty telescopic slide products installed to facilitate maintenance and replenishment of ATMs, cash counting and other in-branch cash handling machinery.
Banking furniture is recognised as being of a specialised nature, requiring slide products that offer the operator smooth, reliable and safe movement when drawers are fully loaded with coinage but also providing high levels of security against unuathorised access when required.
Ground, marine and air defence vehicle applications such as equipment stowage, mountings for weapon systems and racks for electronic systems.
Applications can range from slide based storage systems, lockers and furniture, through rack mounted electronic components, and onto operational and weapon systems requiring linear movement. If required products manufactured from high grade stainless steel can be supplied offering highest levels of corrosion resistance and low magnetic signatures.
Slides and bespoke sub-assemblies for mounting electronic and other equipment including weapon components on vehicles ranging from lightly armoured personnel vehicles (radio and other electronic components) through to battlefield tanks (internal storage, ammunition handling, slide-out generators and workstations).
Equipment stowage components and systems as installed on fire engines
Solid section steel slides lengths from 300mm to 2,000mm for pull-out equipment drawers. Extensions from 50% to 150% of closed length can be supplied, in addition slide systems that offer sequential dual extension with bi-directional travel allowing the drawer to extened from either side of the vehicle. This enables rescue crews to access vital equipment quickly and safely, regardless of the vehicle's orientation to the emergency scene.
Our range of reinforced heavy duty steel slides fitted with additional ball tracks and reinforceing ball bearings are ideally suited for use in some of the more unique applications. Together with a range of slides designed using a rigid "I" beam construction our products offer execelent performance under conditions that may exert high direct and tortional loadings as experienced in such applications as pull-out equipment boards and vertical shelves.
Following extensive testing on selected models our slides are used by the U.K.'s leading producers of complete equipment carriers. These complete tray systems are ready for quick installation, including bespoke mountings for specialist equipment such as auxilliary pumps, tools, hoses and rescue equipment.
Lock-in and lock-out mechanisms facilitate quick and safe operation of the equipment carrier, as well as hold the fully-loaded drawer securely in position when the vehicle is in motion or at the scene.
The design and construction of speciialised operational machinery and machine guards. The excellent range of Saibo hardened linear rails are designed to be economical whilst offering exceptional service life required in machine guarding.
Specification and design of linear movement systems incorporating linear rails and telescopic slides for use in machine guarding applications and the design and installation of manufacturing, cargo handling and other situation specific plant and machinery.
In such industrial applications, reliability and robustness are key requirements. When incorporated into automated plant, movement precision is also vital. The load capacities indicated on our high-end range represent the maximum load that can be carried whilst causing a slide deflection at full extension of no more than 1% of the slide's closed length. This is a much higher and more rigorous standard than is typically used by others for measuring slide load capacities, as a results our customers have come to rely on Sliding System's products for their durability and strength.
Our range also includes slides that operate with ultra-high precision based on innovative roller bearing technology, and which are self aligning.
Our design team has the ability to offer all or any of these components when working alongside your own engineering team.
Telescopic Slide and Linear Rail components for lineside delivery and component handling systems
Linear movement components and telescopic slides for use on repetition-intensive automated production lines. Components require a high resistance to localised wear patterns, uniform operating loads and designs capable of working at fast speeds with high accelerations.
Linear rail and telescopic slide products for component delivery and handling at line-sideassembly stations.
The breadth of our product range gives you an unparalleled advantage when engineering solutions for delivery systems that have to accommodate large irregular shaped components or sub assemblies within space restricted line-side delivery stillages.
Correct selection and specification of the slide system will ensure maximisation of the space inside the delivery stillage and production efficiency while accommodating the natural variations of manual handling present in a time sensitive assembly environment.
Our unique slide and tilt system is a high performance, low-cost product, which was the direct result of working closely with our customers and responding to their specific requirements
Sliding System's award winning slide and tilt system facilitates safe access to high-bay equipment stowage drawers on fire engines, and indeed other applications such as military vehicles and static storage and racking systems.
The flexbility of our Slide and Tilt system will allow you to create novel storage solutions improving vehicle layouts, access and safety.
Our experienced engineers are pleased to offer advice and design assistance with the interfacing into your vehicle design.
Our telescopic slides and tool mounts cover even the most demanding project for commercial vehicles. Smaller, lighter duty rolled steel or solid section slides from our General Devices range will suit a keyboard tray or a display screen, whereas cold drawn steel section slides will fit requirements for full vehicle extension such as mobile broadcast vehicles carrying several 1000kg’s.
With over 30 years of experience, we are more experienced than any other supplier and manufacturer to be able to advise of suitable and performing products.
Sliding Systems are an approved supplier for many prestigious and well-regarded manufacturers both in the United Kingdom and abroad.
With our flexible production facilities, we can accommodate any project and are pleased to assist with special requests whenever possible. Applications involving shock and vibration call for heavy duty, cold drawn steel section slides which we are also able to supply in 316L marine grade stainless steel. If weight or corrosion resistance are parameters that are important we suggest Aluminium T6 section slides, available in load capacities up to 330kg.
Outdoor applications can be fixed in place with specialist marine grade 316L hooks, which safely hold tool boxes or vehicle covers in place.
Roadside assistance and other categories of vehicle that need to stow and provide easy access to equipment can be enhanced through appropriate use of telescopic drawer slide and linear rail systems.
The twin requirements of operator safety and operational effectiveness are of paramount importance. GSF's ability to select and adapt from an unrivalled base product range, and its ability to assist with the design of bespoke and space-saving drawer systems enable us to make a significant contribution to your own product design.
4093.500129 Lock Enquiry
Sliding Systems,
Gledrid Industrial Park,
Chirk,
Wrexham,
LL14 5DG,
United Kingdom
Tel: +44 (0)1691 770303
We would like to hear from you with any feedback about our website or products.
Email us HERE
Sliding Systems engineers have the experience to guide you through the selection process of choosing the right telescopic slide, linear rail or tilting drawer system. We have the widest selection of telescopic and drawer slides available, anywhere, from a few kilos to well over 4,000kg across multiple ranges specifically designed to anticipate almost every demand.
Sliding Systems has entered into a new distribution agreement with Regout Balance...
If you need fast tech support, just click the button and a technician will respond immediately
If you need help with Linear Rails, just click the button and our technician will respond immediately
4015.ADTS040 – ADTS-40
(50-110kg)
Aluminium Non-Corrosive
100% extension
End Profile Width: 24mm
Height: 40mm
Closed Length: 150mm-1200mm
Extended Length: 150mm-1200mm
Load Capacity: 50kg-110kg per pair