×

FORGOT YOUR DETAILS?

CREATE ACCOUNT

4015.XTSR100 (Over extension slide) - XTSR-100 (190-385kg) 150% Super Extension Extreme Duty Steel

Four beam telescopic slides enable the drawer to be extended out 150% from the stowed position. A closed length of 1,000mm can provide 1,500mm of travel (2,500mm fully extended). Ideal for vehicle use where fitting space is limited. The XTSR-100 is used widely throughout the defence industry, where slim over-extension slides are required to fit within a narrow space envelope. 

The XTSR-100 is an extreme load/duty super extension telescopic slide (190-385 kg/pair) suitable for a wide range of applications. At 550mm 1 pair has a full extension load capacity of 380 kg.

Specification Details:

  • Space Envelope Width: 37mm
  • Height: 100mm
  • Closed Length: 300-1600mm
  • Extension Length: 450-2400mm
  • Maximum Load Capacity: 190-385 kg/pair
  • Number of beams: 4
  • Extension Type: Over
  • Material: Zinc plated steel
  • Vibration Resistence: 8

Profile:

Suitable For:

  • DEFENCE - Airborne - Shipborne - Vehicles
  • FIRE - Slide Drawers - Systems - Trays
  • FOOD TRUCK - Stowage & Sliding Drawers
  • MOTOR MANUFACTURING PLANT - Machinery
  • RV/MOTORHOME - Stowage & Sliding Drawers
  • SPECIAL VEHICLES - Coachbuilding - Response Vehicles
  • TRAINS - Battery Rafts - Doors - Seating

Four beam telescopic slides enable the drawer to be extended out 150% from the stowed position. A closed length of 1,000mm can provide 1,500mm of travel (2,500mm fully extended). Ideal for vehicle use where fitting space is limited. The XTSR-100 is used widely throughout the defence industry, where slim over-extension slides are required to fit within a narrow space envelope. 

The XTSR-100 is an extreme load/duty super extension telescopic slide (190-385 kg/pair) suitable for a wide range of applications. At 550mm 1 pair has a full extension load capacity of 380 kg.

Constructed from cold drawn steel sections and fitted with caged ball bearings, the XTSR-100 telescopic slide has an excellent level of resistance to shock and vibration when supporting a dynamic load in the closed position. Accordingly, this slide is well suited to mounting on vehicles. This is a very strong nested slide design, providing for countersunk screws to secure the outer beam to the vehicle chassis. Threaded holes on the inner beam allow for the drawer to be fastened without unsightly nuts showing internally.

Additional product variations can be produced with bespoke closed lengths, extensions, mounting options, surface treatments and stainless ball bearings/cages. We do not recommend XTSR slides are fitted in the minor axis (flat), without due consideration to substantial load reductions.

The production process is ISO9001-2015 accredited. Our steel telescopic slides are manufactured from cold drawn steel C45E+C in accordance with EN 10277. Laser cut ball cages are manufactured from zinc plated sheet metal, and the ball bearings are carbon steel C85 G100 in accordance with DIN 5401. Standard Professional Range steel slides are RoHS & REACH certified to withstand over 1,000 hours corrosion protection, until the appearance of red rust. This is due to the investment made in our own state of the art electrolytic alkaline zinc processing facility. Core steel C45 E+C, with a layer depth of 10-12 microns conforming to DIN EN ISO 9227 neutral salt spray testing. No white rust appearance within 120 hours. No red rust within 1,032 hours.

An individual slide weighs 19.1 kg per metre.

The XTSR-100 slide can be purchased online, for global delivery by clicking this link. The XTSR-100 is manufactured to order or stocked against scheduled orders. Please allow 5-6 weeks for production.

Code

Closed Length (mm)

Extension (mm)

Max Load Capacity (kg)

4015.XTSR100.0300 300mm 450mm 355kg
4015.XTSR100.0350 350mm 525mm 360kg
4015.XTSR100.400 400mm 600mm 365kg
4015.XTSR100.0450 450mm 675mm 370kg
4015.XTSR100.0500 500mm 750mm 375kg
4015.XTSR100.0550 550mm 825mm 380kg
4015.XTSR100.0600 600mm 900mm 385kg
4015.XTSR100.0650 650mm 975mm 380kg
4015.XTSR100.0700 700mm 1050mm 370kg
4015.XTSR100.0750 750mm 1125mm 360kg
4015.XTSR100.0800 800mm 1200mm 350kg
4015.XTSR100.0850 850mm 1275mm 340kg
4015.XTSR100.0900 900mm 1350mm 330kg
4015.XTSR100.0950 950mm 1425mm 320kg
4015.XTSR100.1000 1000mm 1500mm 310kg
4015.XTSR100.1050 1050mm 1575mm 300kg
4015.XTSR100.1100 1100mm 1650mm 290kg
4015.XTSR100.1150 1150mm 1725mm 280kg
4015.XTSR100.1200 1200mm 1800mm 270kg
4015.XTSR100.1250 1250mm 1875mm 260kg
4015.XTSR100.1300 1300mm 1950mm 250kg
4015.XTSR100.1350 1350mm 2025mm 240kg
4015.XTSR100.1400 1400mm 2100mm 230kg
4015.XTSR100.1450 1450mm 2175mm 220kg
4015.XTSR100.1500 1500mm 2250mm 210kg
4015.XTSR100.1550 1550mm 2325mm 200kg
4015.XTSR100.1600 1600mm 2400mm 190kg

Downloads Access

To download the CAD files and specifications for this product you need to be logged in.

Data Sheet & main product information -

Technical Description & Maintenance -

XTSR100 length 300mm- 3D STEP FILE - 4015.XTSR100 length 300mm

XTSR100 length 350mm- 3D STEP FILE - 4015.XTSR100 length 350mm

XTSR100 length 400mm- 3D STEP FILE - 4015.XTSR100 length 400mm

XTSR100 length 450mm- 3D STEP FILE - 4015.XTSR100 length 450mm

XTSR100 length 500mm- 3D STEP FILE - 4015.XTSR100 length 500mm

XTSR100 length 550mm- 3D STEP FILE - 4015.XTSR100 length 550mm

XTSR100 length 600mm- 3D STEP FILE - 4015.XTSR100 length 600mm

XTSR100 length 650mm- 3D STEP FILE - 4015.XTSR100 length 650mm

XTSR100 length 700mm- 3D STEP FILE - 4015.XTSR100 length 700mm

XTSR100 length 750mm- 3D STEP FILE - 4015.XTSR100 length 750mm

XTSR100 length 800mm- 3D STEP FILE - 4015.XTSR100 length 800mm

XTSR100 length 850mm- 3D STEP FILE - 4015.XTSR100 length 850mm

XTSR100 length 900mm- 3D STEP FILE - 4015.XTSR100 length 900mm

XTSR100 length 950mm- 3D STEP FILE - 4015.XTSR100 length 950mm

XTSR100 length 1000mm- 3D STEP FILE - 4015.XTSR100 length 1000mm

XTSR100 length 1050mm- 3D STEP FILE - 4015.XTSR100 length 1050mm

XTSR100 length 1100mm- 3D STEP FILE - 4015.XTSR100 length 1100mm

XTSR100 length 1150mm- 3D STEP FILE - 4015.XTSR100 length 1150mm

XTSR100 length 1200mm- 3D STEP FILE - 4015.XTSR100 length 1200mm

XTSR100 length 1250mm- 3D STEP FILE - 4015.XTSR100 length 1250mm

XTSR100 length 1300mm- 3D STEP FILE - 4015.XTSR100 length 1300mm

XTSR100 length 1350mm- 3D STEP FILE - 4015.XTSR100 length 1350mm

XTSR100 length 1400mm- 3D STEP FILE - 4015.XTSR100 length 1400mm

XTSR100 length 1450mm- 3D STEP FILE - 4015.XTSR100 length 1450mm

XTSR100 length 1500mm- 3D STEP FILE - 4015.XTSR100 length 1500mm

XTSR100 length 1550mm- 3D STEP FILE - 4015.XTSR100 length 1550mm

XTSR100 length 1600mm- 3D STEP FILE - 4015.XTSR100 length 1600mm

Defence

Ground, marine and air defence vehicle applications such as equipment stowage, mountings for weapon systems and racks for electronic systems

Ship Borne

Applications can range from slide based storage systems, lockers and furniture, through rack mounted electronic components, and onto operational and weapon systems requiring linear movement. If required products manufactured from high grade stainless steel can be supplied offering highest levels of corrosion resistance and low magnetic signatures.

Vehicles

Slides and bespoke sub-assemblies for mounting electronic and other equipment including weapon components on vehicles ranging from lightly armoured personnel vehicles (radio and other electronic components) through to battlefield tanks (internal storage, ammunition handling, slide-out generators and workstations).

Fire

Equipment stowage components and systems as installed on fire engines

Slide Drawers

Solid section steel slides lengths from 300mm to 2,000mm for pull-out equipment drawers. Extensions from 50% to 150% of closed length can be supplied, in addition slide systems that offer sequential dual extension with bi-directional travel allowing the drawer to extened from either side of the vehicle. This enables rescue crews to access vital equipment quickly and safely, regardless of the vehicle's orientation to the emergency scene.

Systems

Our range of reinforced heavy duty steel slides fitted with additional ball tracks and reinforceing ball bearings are ideally suited for use in some of the more unique applications. Together with a range of slides designed using a rigid "I" beam construction our products offer execelent performance under conditions that may exert high direct and tortional loadings as experienced in such applications as pull-out equipment boards and vertical shelves.

Trays

Following extensive testing on selected models our slides are used by the U.K.'s leading producers of complete equipment carriers. These complete tray systems are ready for quick installation, including bespoke mountings for specialist equipment such as auxilliary pumps, tools, hoses and rescue equipment.

Lock-in and lock-out mechanisms facilitate quick and safe operation of the equipment carrier, as well as hold the fully-loaded drawer securely in position when the vehicle is in motion or at the scene.

Food Truck - Mobile Catering

Whether you have a full side trailer extension to build or a small pull out coffee machine tray from the back of a Vespa Ape, we have the right slide for you. From specialised mobile military deployment catering units to market trader applications, we have the knowledge to make it happen.

We are a privately-owned company, established over 30 years and our slides and tool mounts cover every possible application within the catering and hospitality industry.

Our speciality are bespoke telescopic slides suited to catering trailers and full van conversions.

If you require a light load slide we suggest using our standard rolled steel slides covered in this section, for larger full vehicle conversions up to 2000kg we recommend our cold drawn steel section I beam heavy duty slides. The rigidity and strength of the material used in the manufacture, without use of plastic components, make the slides appropriate for heavy duty usage which demand resistance to shock and vibration.

In addition to telescopic slides project we supply auxiliary equipment to fix pipes or other tools.

Our Fulterer range of slides comply with NSF food grade specifications to allow for installation of our drawer slide in direct contact with food.

Motor Manufacturing Plant

Telescopic Slide and Linear Rail components for lineside delivery and component handling systems

Automated Production Lines

Linear movement components and telescopic slides for use on repetition-intensive automated production lines. Components require a high resistance to localised wear patterns, uniform operating loads and designs capable of working at fast speeds with high accelerations.

Manually Operated

Linear rail and telescopic slide products for component delivery and handling at line-sideassembly stations.

The breadth of our product range gives you an unparalleled advantage when engineering solutions for delivery systems that have to accommodate large irregular shaped components or sub assemblies within space restricted line-side delivery stillages.

Correct selection and specification of the slide system will ensure maximisation of the space inside the delivery stillage and production efficiency while accommodating the natural variations of manual handling present in a time sensitive assembly environment.

RV & Motorhome

Shop Fitting & Display

The retail sector is increasingly becoming a shopping ‘experience’ therefore the fittings for such outlets are vital to fit the bill. With our full range of slides, we can help you achieve both design and functionality.

Our lighter duty slides are well suited for smaller drawers or applications where little load is applied when extended. If the project requirements are to move a wall from its original position to display goods a bottom mount slide might be more suitable due to space restrictions. The Fulterer Range of vertical pull out slides provides stability, load capacity as well as the sleek design required in current retail outfits. All slides in the Fulterer range are available in different finishes (white, grey and black) which can be supplied against MOQ’s.

Special & Commercial Vehicles

Our telescopic slides and tool mounts cover even the most demanding project for commercial vehicles. Smaller, lighter duty rolled steel or solid section slides from our General Devices range will suit a keyboard tray or a display screen, whereas cold drawn steel section slides will fit requirements for full vehicle extension such as mobile broadcast vehicles carrying several 1000kg’s.

With over 30 years of experience, we are more experienced than any other supplier and manufacturer to be able to advise of suitable and performing products.

Sliding Systems are an approved supplier for many prestigious and well-regarded manufacturers both in the United Kingdom and abroad.

With our flexible production facilities, we can accommodate any project and are pleased to assist with special requests whenever possible. Applications involving shock and vibration call for heavy duty, cold drawn steel section slides which we are also able to supply in 316L marine grade stainless steel. If weight or corrosion resistance are parameters that are important we suggest Aluminium T6 section slides, available in load capacities up to 330kg.

Outdoor applications can be fixed in place with specialist marine grade 316L hooks, which safely hold tool boxes or vehicle covers in place.

Response Vehicles

Roadside assistance and other categories of vehicle that need to stow and provide easy access to equipment can be enhanced through appropriate use of telescopic drawer slide and linear rail systems.

The twin requirements of operator safety and operational effectiveness are of paramount importance. GSF's ability to select and adapt from an unrivalled base product range, and its ability to assist with the design of bespoke and space-saving drawer systems enable us to make a significant contribution to your own product design.

Trains

From heavy duty under-train battery rafts to high-repeat door systems and, increasingly, sliding seat systems, Sliding Systems has products that suit all of these applications

Battery Rafts

Heavy duty specialist slide components for mounting under-train battery rafts. The slides must, like the carriage as a whole, comply with crash testing criteria and, as high speed trains become ever more prevalent, there is an increasing requirement that the slides are able to hold heavy battery sets in position despite large dynamic loads.

Battery bays can also house a corrosive atmosphere over long periods, and therefore careful specification of corrosion resistant finishes are required. The nitration option available onour relevant product range provides this resistance as well as considerably strengthening the surface structure of the slide itself.

To facilitate ease of fitting and maintenance, GSF is able to design bespoke fitting brackets including, for example, positioning pins.

Despite improvements to train suspensions, running with metal wheels on metal tracks also makes vibration and shock relevant issues to consider in slide design. Finally, as battery rafts constitute one of the heaviest loads typically mounted on slides, careful consideration is required to the consequent force required to push-in or pull-out the battery raft and the strength and shock-reduction characteristics of the end stops. These are all critical factors that should direct the slide specification.

Doors

The use of telescopic slides or linear rails to mount train doors requires a product able to deal with both the dynamic loads and crash survival criteria that are inevitably relevant to train-based applications. In addition the components have to operate reliably and with low maintenance requirements over a very high number of repetitions. Doors on underground trains are required typically to open and close up to 20 times an hour day after day over the working life of the carriage.

To withstand such a high level of repetitions, the ball bearings and the associated ball track tracks need to be hardened to resist pitting and corrosion. Cold drawn steel slides also perform better over time, as the slide profile is less prone to long term profile deformation than is the case for cold rolled profiles.

Seating

Train operators are increasingly offering adjustable seating in first class passenger compartments. Simplicity and durability are key determinants of which linear rail and slide components will work successfully in ensuring that the seat operates reliably as intended and without a requirement for maintenance activity.

Ready to buy this product?

Ready to make an enquiry?

4015.XTSR100 Enquiry

TOP