×

Choose Your Language

FORGOT YOUR DETAILS?

CREATE ACCOUNT

Providing quality Sliding Systems across the globe

4013.5299 Radial Goliath (50kg)

4013.5299 (Telescopic Slide) - Radial Goliath Slide 5299 (50kg) Aluminium

The 5299 Radial Goliath Slide is a heavy duty extreme extension telescopic slide (50Kg/pair). Designed for the sliding and transfer of supported loads in the bespoke furniture market, this slide allows for multiple leaf tables to be infinitely extended.

Aluminium Radial Slides utilise a unique crossed roller bearing system which makes full length contact within the ball race and eradicates bearing indentation (brinelling) and migration. This is a very rugged slide and, due to the unique roller design, outperforms similar ball bearing based products.

Specification Details:

  • Space Envelope Width: 156mm
  • Height: 52mm
  • Closed Length: 300-700mm
  • Extension Length: 1500-3500mm
  • Maximum Load Capacity: 50-50 kg/pair
  • Number of beams: 6
  • Extension Type: Over
  • Material: Anodised aluminium 6005a
  • Vibration Resistance: 8

Profile:

Suitable For:

  • CATERING - Products & Equipment
  • FURNITURE - Architecture & Sliding Units

The 5299 Radial Goliath Slide is a heavy duty extreme extension telescopic slide (50Kg/pair). Designed for the sliding and transfer of supported loads in the bespoke furniture market, this slide allows for multiple leaf tables to be infinitely extended.

Aluminium Radial Slides utilise a unique crossed roller bearing system which makes full length contact within the ball race and eradicates bearing indentation (brinelling) and migration. This is a very rugged slide and, due to the unique roller design, outperforms similar ball bearing based products.

Goliath slides are totally flexible in design to accommodate all required extensions. By battening and securing slides together we can add beams to meet the customer's specific extension, thus small batch projects are easily achievable.

Cross roller bearings are best suited to applications where offset loads and point contact stresses cause significant indentation and bearing migration in the ball race and subsequent slide failure. However, due to the rigidity of the slides, there is no play within the beams and this allows for deflection free extension. The Goliath slides are not load supporting and need to be fitted within the confines of table supports, however they are ideal for side load resistance and stability when fitted.

The 5299 Radial Slide is manufactured from 6005a aluminium with the bearing races milled for tolerance. The finish is self-colour anodization, however there are various options. The bearings are hardened steel and chromed rods.

Please allow 5-6 weeks for the manufacture of Goliath slides.

* There are no CAD files available for this product, if you have any questions then please call us on +44 (0)1691 770303 between 9am-5pm GMT, or alternatively click here to contact us by email.

Code

Closed Length (mm)

Extension (mm)

Max Load Capacity (kg)
4013.5299.0300 300mm 1500mm 50kg
4013.5299.0350 350mm 1750mm 50kg
4013.5299.0400 400mm 2000mm 50kg
4013.5299.0450 450mm 2250mm 50kg
4013.5299.0500 500mm 2500mm 50kg
4013.5299.0550 550mm 2750mm 50kg
4013.5299.0600 600mm 3000mm 50kg
4013.5299.0650 650mm 3250mm 50kg
4013.5299.0700 700mm 3500mm 50kg

* There are no Download files available for this product, if you have any questions then please call us on +44 (0)1691 770303 between 9am-5pm GMT, or alternatively click here to contact us by email.

Furniture

The 5299 Radial Goliath Slide is a heavy duty extreme extension telescopic slide (50Kg/pair). Designed for the sliding and transfer of supported loads in the bespoke furniture market, this slide allows for multiple leaf tables to be infinitely extended.

Aluminium Radial Slides utilise a unique crossed roller bearing system which makes full length contact within the ball race and eradicates bearing indentation (brinelling) and migration. This is a very rugged slide and, due to the unique roller design, outperforms similar ball bearing based products.

Goliath slides are totally flexible in design to accommodate all required extensions. By battening and securing slides together we can add beams to meet the customer's specific extension, thus small batch projects are easily achievable.

Cross roller bearings are best suited to applications where offset loads and point contact stresses cause significant indentation and bearing migration in the ball race and subsequent slide failure. However, due to the rigidity of the slides, there is no play within the beams and this allows for deflection free extension. The Goliath slides are not load supporting and need to be fitted within the confines of table supports, however they are ideal for side load resistance and stability when fitted.

The 5299 Radial Slide is manufactured from 6005a aluminium with the bearing races milled for tolerance. The finish is self-colour anodization, however there are various options. The bearings are hardened steel and chromed rods.

Catering

Defence

Ground, marine and air defence vehicle applications such as equipment stowage, mountings for weapon systems and racks for electronic systems

Ship Borne

Applications can range from slide based storage systems, lockers and furniture, through rack mounted electronic components, and onto operational and weapon systems requiring linear movement. If required products manufactured from high grade stainless steel can be supplied offering highest levels of corrosion resistance and low magnetic signatures.

Vehicles

Slides and bespoke sub-assemblies for mounting electronic and other equipment including weapon components on vehicles ranging from lightly armoured personnel vehicles (radio and other electronic components) through to battlefield tanks (internal storage, ammunition handling, slide-out generators and workstations).

Fire

Equipment stowage components and systems as installed on fire engines

Slide Drawers

Solid section steel slides lengths from 300mm to 2,000mm for pull-out equipment drawers. Extensions from 50% to 150% of closed length can be supplied, in addition slide systems that offer sequential dual extension with bi-directional travel allowing the drawer to extened from either side of the vehicle. This enables rescue crews to access vital equipment quickly and safely, regardless of the vehicle's orientation to the emergency scene.

Systems

Our range of reinforced heavy duty steel slides fitted with additional ball tracks and reinforceing ball bearings are ideally suited for use in some of the more unique applications. Together with a range of slides designed using a rigid "I" beam construction our products offer execelent performance under conditions that may exert high direct and tortional loadings as experienced in such applications as pull-out equipment boards and vertical shelves.

Trays

Following extensive testing on selected models our slides are used by the U.K.'s leading producers of complete equipment carriers. These complete tray systems are ready for quick installation, including bespoke mountings for specialist equipment such as auxilliary pumps, tools, hoses and rescue equipment.

Lock-in and lock-out mechanisms facilitate quick and safe operation of the equipment carrier, as well as hold the fully-loaded drawer securely in position when the vehicle is in motion or at the scene.

Furniture & Architecture

We are delighted to be able to advise our customers on the most diverse projects possible.

One day we could be talking to an ambitious DIY customer who wants to install a removable console tray in his game room and the next project could be a whole building interior refurbishment destined for micro flats. Whilst each project represents different challenges and requirements we are confident in finding a suitable slide or linear rail.

Standard furniture fittings will suit the Thomas Regout or Fulterer range of rolled steel slides and linear rail. Whereas high end architectural furniture design may call for aluminium drawer slides, such as the 8027/8028 or the aluminium T6 slide from our professional range.

To suit yacht interior design, we can supply Viadana chandlery and stainless steel 316L telescopic slides.

Motor Manufacturing Plant

Telescopic Slide and Linear Rail components for lineside delivery and component handling systems

Automated Production Lines

Linear movement components and telescopic slides for use on repetition-intensive automated production lines. Components require a high resistance to localised wear patterns, uniform operating loads and designs capable of working at fast speeds with high accelerations.

Manually Operated

Linear rail and telescopic slide products for component delivery and handling at line-sideassembly stations.

The breadth of our product range gives you an unparalleled advantage when engineering solutions for delivery systems that have to accommodate large irregular shaped components or sub assemblies within space restricted line-side delivery stillages.

Correct selection and specification of the slide system will ensure maximisation of the space inside the delivery stillage and production efficiency while accommodating the natural variations of manual handling present in a time sensitive assembly environment.

Special & Commercial Vehicles

Our telescopic slides and tool mounts cover even the most demanding project for commercial vehicles. Smaller, lighter duty rolled steel or solid section slides from our General Devices range will suit a keyboard tray or a display screen, whereas cold drawn steel section slides will fit requirements for full vehicle extension such as mobile broadcast vehicles carrying several 1000kg’s.

With over 30 years of experience, we are more experienced than any other supplier and manufacturer to be able to advise of suitable and performing products.

Sliding Systems are an approved supplier for many prestigious and well-regarded manufacturers both in the United Kingdom and abroad.

With our flexible production facilities, we can accommodate any project and are pleased to assist with special requests whenever possible. Applications involving shock and vibration call for heavy duty, cold drawn steel section slides which we are also able to supply in 316L marine grade stainless steel. If weight or corrosion resistance are parameters that are important we suggest Aluminium T6 section slides, available in load capacities up to 330kg.

Outdoor applications can be fixed in place with specialist marine grade 316L hooks, which safely hold tool boxes or vehicle covers in place.

Response Vehicles

Roadside assistance and other categories of vehicle that need to stow and provide easy access to equipment can be enhanced through appropriate use of telescopic drawer slide and linear rail systems.

The twin requirements of operator safety and operational effectiveness are of paramount importance. GSF's ability to select and adapt from an unrivalled base product range, and its ability to assist with the design of bespoke and space-saving drawer systems enable us to make a significant contribution to your own product design.

Ready to make an enquiry?

4013.5299 Enquiry

COMPANY

Sliding Systems,
Gledrid Industrial Park,
Chirk,
Wrexham,
LL14 5DG,
United Kingdom

Tel: +44 (0)1691 770303

FEEDBACK

We would like to hear from you with any feedback about our website or products.

Email us HERE

ABOUT US

Sliding Systems engineers have the experience to guide you through the selection process of choosing the right telescopic slide, linear rail or tilting drawer system. We have the widest selection of telescopic and drawer slides available, anywhere, from a few kilos to well over 4,000kg across multiple ranges specifically designed to anticipate almost every demand.

LATEST NEWS

VIEW ALL

FOLLOW US

Terms & Conditions | Trading Terms & Conditions | Privacy & Cookie Policy
© 2022 GSF Slides All rights reserved | Website by Arise Media
TOP