...
×

Choose Your Language

FORGOT YOUR DETAILS?

CREATE ACCOUNT

Providing quality Sliding Systems across the globe

4012.CLB223 Chassis Trak CLB-223

Chassis Trak CLB-223 (72-113kg/pr) Lock Out & Detach

Our Chassis Trak slides are priced and sold per pair and not singularly. OEM discounts for scheduled orders please enquire.

Specification Details:

  • Space Envelope Width: 0.5" - 12.7mm
  • Height: 2.78" - 70.6mm
  • Closed Length: 254-762mm
  • Extension Length: 178mm - 533mm
  • Maximum Load Capacity: 72-113 kg/pair
  • Number of beams: 2
  • Extension Type: Partial
  • Material: Steel
  • Vibration Resistance: 3
  • Sold as a Pair

Profile:

Suitable For:

  • DEFENCE - Airborne - Shipborne - Vehicles
  • ELECTRONICS - Mounting
  • INDUSTRIAL STORAGE - Museum & Workspace Storage
  • MOTOR MANUFACTURING PLANT - Machinery
  • RV/MOTORHOME - Stowage & Sliding Drawers
  • SHOP FITTING - Sliding Units & Displays
  • SPECIAL VEHICLES - Commercial & Response Vehicles

Chassis Trak CLB-223 Partial Extension Slide With Lock Out & Detach As Standard

1. CLB-223 consists of one right and one left hand slide (1 pair).

2. All slides are supplied with special (.094” max. head height) #8-32x3/8 Phillips pan head screws and self-locking nuts for mounting one set of slides. Use only these special screws when mounting through slide member to prevent internal damage to ball retainer. If mounting to cabinet rails, see cabinet mounting section for ball bearing slides.

3. CLB-223 has a front disconnect feature and locks at full extension. For non-locking, see “order” chart.

4. Slide members are made from 14 gauge (.074) work hardened cold rolled steel.

5. Finish: clear zinc commercial plating.

6. Holes other than those shown may be in part at manufacture’s option.

7. Load capacity is based on one set of slides at full extension with load (center of gravity)centered between the slides and at midpoint of the slide (chassis section). Load capacities have a 100% (static load) safety factor at full extension. The slides will support more than the stated capacities but are not designed to be operated at capacities greater than those stated.

8. Grease applied to ball bearing slides has a temperature range of –45ºF to +350ºF, however, due to the use of plastic guide and support balls, the slide is designed for applications not exceeding 150ºF ambient temperature.

9. Odd length slides available, see next page for dimensions, contact factory for more information.

10. Other non-standard options which are available include: special marking, special extensions, special finishes, lock-in and complete design changes per customer request. Contact factory as these options will require a special reference number to assure receipt of specified options.

All General Devices slides are manufactured to order, so please allow 5-6 weeks, unless subscribed to our stockholding programme. 3D .stp files available on request.

Our Chassis Trak slides are priced and sold per pair and not singularly. OEM discounts for scheduled orders please enquire.

CAD VIEW - LEFT

CAD VIEW - RIGHT

Code

Closed Length (in)

Extension (in)

Max Load Capacity (kg)
4012.CLB223.010 10in 7in 113kg
4012.CLB223.012 12in 9in 113kg
4012.CLB223.014 14in 11in 109kg
4012.CLB223.016 16in 12in 104kg
4012.CLB223.018 18in 13in 102kg
4012.CLB223.020 20in 15in 100kg
4012.CLB223.022 22in 16in 95kg
4012.CLB223.024 24in 17in 91kg
4012.CLB223.026 26in 19in 86kg
4012.CLB223.028 28in 20in 82kg
4012.CLB223.030 30in 21in 72kg

Downloads Access

To download the CAD files and specifications for this product you need to be logged in.

Data Sheet & main product information -

4012.CLB-223 Specification Datasheet

Installation Sheet -

4012.CLB-223 Installation Sheet

4012.CLB223 - 254mm (10") - 3D STEP FILE - 4012.CLB223 length 254mm (10") - LEFT

4012.CLB223 - 254mm (10") - 3D STEP FILE - 4012.CLB223 length 254mm (10") - RIGHT

4012.CLB223 - 304mm (12") - 3D STEP FILE - 4012.CLB223 length 304mm (12") - LEFT

4012.CLB223 - 304mm (12") - 3D STEP FILE - 4012.CLB223 length 304mm (12") - RIGHT

4012.CLB223 - 356mm (14") - 3D STEP FILE - 4012.CLB223 length 356mm (14") - LEFT

4012.CLB223 - 356mm (14") - 3D STEP FILE - 4012.CLB223 length 356mm (14") - RIGHT

4012.CLB223 - 406mm (16") - 3D STEP FILE - 4012.CLB223 length 406mm (16") - LEFT

4012.CLB223 - 406mm (16") - 3D STEP FILE - 4012.CLB223 length 406mm (16") - RIGHT

4012.CLB223 - 457mm (18") - 3D STEP FILE - 4012.CLB223 length 457mm (18") - LEFT

4012.CLB223 - 457mm (18") - 3D STEP FILE - 4012.CLB223 length 457mm (18") - RIGHT

4012.CLB223 - 508mm (20") - 3D STEP FILE - 4012.CLB223 length 508mm (20") - LEFT

4012.CLB223 - 508mm (20") - 3D STEP FILE - 4012.CLB223 length 508mm (20") - RIGHT

4012.CLB223 - 559mm (22") - 3D STEP FILE - 4012.CLB223 length 559mm (22") - LEFT

4012.CLB223 - 559mm (22") - 3D STEP FILE - 4012.CLB223 length 559mm (22") - RIGHT

4012.CLB223 - 610mm (24") - 3D STEP FILE - 4012.CLB223 length 610mm (24") - LEFT

4012.CLB223 - 610mm (24") - 3D STEP FILE - 4012.CLB223 length 610mm (24") - RIGHT

4012.CLB223 - 660mm (26") - 3D STEP FILE - 4012.CLB223 length 660mm (26") - LEFT

4012.CLB223 - 660mm (26") - 3D STEP FILE - 4012.CLB223 length 660mm (26") - RIGHT

4012.CLB223 - 711mm (28") - 3D STEP FILE - 4012.CLB223 length 711mm (28") - LEFT

4012.CLB223 - 711mm (28") - 3D STEP FILE - 4012.CLB223 length 711mm (28") - RIGHT

4012.CLB223 - 762mm (30") - 3D STEP FILE - 4012.CLB223 length 762mm (30") - LEFT

4012.CLB223 - 762mm (30") - 3D STEP FILE - 4012.CLB223 length 762mm (30") - RIGHT

Defence

Ground, marine and air defence vehicle applications such as equipment stowage, mountings for weapon systems and racks for electronic systems

Ship Borne

Applications can range from slide based storage systems, lockers and furniture, through rack mounted electronic components, and onto operational and weapon systems requiring linear movement. If required products manufactured from high grade stainless steel can be supplied offering highest levels of corrosion resistance and low magnetic signatures.

Vehicles

Slides and bespoke sub-assemblies for mounting electronic and other equipment including weapon components on vehicles ranging from lightly armoured personnel vehicles (radio and other electronic components) through to battlefield tanks (internal storage, ammunition handling, slide-out generators and workstations).

Electronics

Telescopic slides (full extension and over extension) for mounting electronics racks and components for maintenance and installation purposes.

Specials

For the mounting of electronics in non-standard environments, many different factors may need to be taken into account.  For example, when mounted in vehicles, the electronic components and the slide systems holding them in place have to be able to withstand vibration, impact, and dynamic forces caused by the movement of the vehicle itself.  In some cases, particularly military applications, the system may need to be designed to withstand damp, dusty and corrosive conditions as well.

GSF's long experience of specifying slides and systems for a vast array of non-standard applications constitutes possibly the most valuable resource available to you. To help ensure that your product performance criteria are fully satisfied a range of additional options are available for consideration - selection of base materials for the slide beams, cages and ball bearings, specification of corrosion resistant finishes, end-stops, locking mechanisms, double extensions, slide reinforcing and many more.

Effectivly, GSF can provide the most standard of solutions through to a totally bespoke slide design.

Industrial Storage

In-rack drawers and bespoke storage systems and assemblies

Museum Storage

The breadth of GSF's product range gives you an unparalled advantage when engineering solutions for unique storage systems that have to accomodate large irregular shaped artifacts or exhibits. Our experience with some of the more unusual high volume low load applications and environmentally sensitive storage conditions is available for you to call upon together with access to perhaps the widest range of sliding procuts in the world.

Correct selection and specification of the slide system will ensure maximisation of the space inside the storage or display unit while providing safe and secure access when required.

Workspace Storage

GSF offers a wide range of standardised products that are available direct from stock and which are most suitable for use in workspace desking, tool storage, assembly and operation stations. These products can be purchased free of restrictive minimum order quantities and charges.

Motor Manufacturing Plant

Telescopic Slide and Linear Rail components for lineside delivery and component handling systems

Automated Production Lines

Linear movement components and telescopic slides for use on repetition-intensive automated production lines. Components require a high resistance to localised wear patterns, uniform operating loads and designs capable of working at fast speeds with high accelerations.

Manually Operated

Linear rail and telescopic slide products for component delivery and handling at line-sideassembly stations.

The breadth of our product range gives you an unparalleled advantage when engineering solutions for delivery systems that have to accommodate large irregular shaped components or sub assemblies within space restricted line-side delivery stillages.

Correct selection and specification of the slide system will ensure maximisation of the space inside the delivery stillage and production efficiency while accommodating the natural variations of manual handling present in a time sensitive assembly environment.

RV & Motorhome

Shop Fitting & Display

The retail sector is increasingly becoming a shopping ‘experience’ therefore the fittings for such outlets are vital to fit the bill. With our full range of slides, we can help you achieve both design and functionality.

Our lighter duty slides are well suited for smaller drawers or applications where little load is applied when extended. If the project requirements are to move a wall from its original position to display goods a bottom mount slide might be more suitable due to space restrictions. The Fulterer Range of vertical pull out slides provides stability, load capacity as well as the sleek design required in current retail outfits. All slides in the Fulterer range are available in different finishes (white, grey and black) which can be supplied against MOQ’s.

Special & Commercial Vehicles

Our telescopic slides and tool mounts cover even the most demanding project for commercial vehicles. Smaller, lighter duty rolled steel or solid section slides from our General Devices range will suit a keyboard tray or a display screen, whereas cold drawn steel section slides will fit requirements for full vehicle extension such as mobile broadcast vehicles carrying several 1000kg’s.

With over 30 years of experience, we are more experienced than any other supplier and manufacturer to be able to advise of suitable and performing products.

Sliding Systems are an approved supplier for many prestigious and well-regarded manufacturers both in the United Kingdom and abroad.

With our flexible production facilities, we can accommodate any project and are pleased to assist with special requests whenever possible. Applications involving shock and vibration call for heavy duty, cold drawn steel section slides which we are also able to supply in 316L marine grade stainless steel. If weight or corrosion resistance are parameters that are important we suggest Aluminium T6 section slides, available in load capacities up to 330kg.

Outdoor applications can be fixed in place with specialist marine grade 316L hooks, which safely hold tool boxes or vehicle covers in place.

Response Vehicles

Roadside assistance and other categories of vehicle that need to stow and provide easy access to equipment can be enhanced through appropriate use of telescopic drawer slide and linear rail systems.

The twin requirements of operator safety and operational effectiveness are of paramount importance. GSF's ability to select and adapt from an unrivalled base product range, and its ability to assist with the design of bespoke and space-saving drawer systems enable us to make a significant contribution to your own product design.

Ready to make an enquiry?

4012.CLB-223 Enquiry

COMPANY

Sliding Systems,
Gledrid Industrial Park,
Chirk,
Wrexham,
LL14 5DG,
United Kingdom

Tel: +44 (0)1691 770303

FEEDBACK

We would like to hear from you with any feedback about our website or products.

Email us HERE

ABOUT US

Sliding Systems engineers have the experience to guide you through the selection process of choosing the right telescopic slide, linear rail or tilting drawer system. We have the widest selection of telescopic and drawer slides available, anywhere, from a few kilos to well over 4,000kg across multiple ranges specifically designed to anticipate almost every demand.

LATEST NEWS

VIEW ALL

FOLLOW US

Terms & Conditions | Trading Terms & Conditions | Privacy & Cookie Policy
© 2022 GSF Slides All rights reserved | Website by Arise Media
TOP