×

Choose Your Language

FORGOT YOUR DETAILS?

CREATE ACCOUNT

Providing quality Sliding Systems across the globe

4005.CONBAS Config A

4005.CONBAS (Locking Base Mount) - Container Red Base Mount: Config A

Container Red fully locking slides are now supplied with a flexible bracket system referred to as CONBAS, allowing them to be used as a highly economical base mount. Supplied with four bracket options fitted to the slides, this is a highly flexible system allowing floor mount, bottom mount or a combination of both.

CONBAS Mount A provides a bracketry configuration to floor mount the slide in the closed position when space is limited. The inner beam bracket is mounted to support a drawer or cradle underneath. The slides are supplied as a LH & RH pair with brackets fully fitted and ready to use. For load capacity, datasheets and 3D files, please refer to the 4005.CONRED Container Red slides.

Specification Details:

  • Space Envelope Width: 25mm
  • Height: 81mm
  • Closed Length: 305-1524mm
  • Extension Length: 305-1524mm
  • Maximum Load Capacity: 130-250 kg/pair
  • Number of beams: 3
  • Extension Type: Total
  • Material: Zinc plated steel
  • Vibration Resistance: 6

Profile:

Suitable For:

  • DEFENCE - Airborne - Shipborne - Vehicles
  • FIRE - Slide Drawers - Systems - Trays
  • SPECIAL VEHICLES - Commercial & Response Vehicles

Container Red fully locking slides are now supplied with a flexible bracket system referred to as CONBAS, allowing them to be used as a highly economical base mount. Supplied with four bracket options fitted to the slides, this is a highly flexible system allowing floor mount, bottom mount or a combination of both.

The brackets are made in four length options which are interchangeable to support all Container Slide lengths up to 1524mm. The brackets can also be purchased separately with a fastenings kit for customer fitting. We have four bracket configurations for mounting: A, B C & D. Each allows the fitter to choose which way to mount the slides. The brackets can be removed and re-positioned as  bolts & nuts are used to secure them, not rivets.

CONBAS Mount A provides a bracketry configuration to floor mount the slide in the closed position when space is limited. The inner beam bracket is mounted to support a drawer or cradle underneath. The slides are supplied as a LH & RH pair with brackets fully fitted and ready to use. For load capacity, datasheets and 3D files, please refer to the 4005.CONRED Container Red slides

4005.CONBAS slides are supplied from stock, across all lengths, with fast leadtimes

Code

Closed Length (mm)

Extension (mm)

Max Load Capacity (kg)
4005.CONBAS.012A 305mm 305mm 130kg
4005.CONBAS.014A 356mm 356mm 180kg
4005.CONBAS.016A 406mm 406mm 250kg
4005.CONBAS.018A 457mm 457mm 250kg
4005.CONBAS.020A 508mm 508mm 250kg
4005.CONBAS.022A 559mm 559mm 250kg
4005.CONBAS.024A 610mm 610mm 250kg
4005.CONBAS.026A 660mm 660mm 250kg
4005.CONBAS.028A 711mm 711mm 250kg
4005.CONBAS.030A 762mm 762mm 230kg
4005.CONBAS.032A 812mm 812mm 230kg
4005.CONBAS.034A 864mm 864mm 230kg
4005.CONBAS.036A 914mm 914mm 230kg
4005.CONBAS.038A 965mm 965mm 230kg
4005.CONBAS.040A 1016mm 1016mm 230kg
4005.CONBAS.042A 1067mm 1067mm 230kg
4005.CONBAS.044A 1117mm 1117mm 200kg
4005.CONBAS.046A 1168mm 1168mm 200kg
4005.CONBAS.048A 1219mm 1219mm 200kg
4005.CONBAS.050A 1270mm 1270mm 200kg
4005.CONBAS.052A 1321mm 1321mm 200kg
4005.CONBAS.054A 1372mm 1372mm 200kg
4005.CONBAS.056A 1422mm 1422mm 200kg
4005.CONBAS.058A 1473mm 1473mm 200kg
4005.CONBAS.060A 1524mm 1524mm 200kg

Downloads Access

To download the CAD files and specifications for this product you need to be logged in.

Data Sheet & main product information -

4005.CONBAS Datasheet

2D Datasheet -

4005.CONBAS 2D

4005.CONBAS-A - 305mm - 3D STEP File
4005.CONBAS-A length 305mm (12″)

4005.CONBAS-A - 356mm - 3D STEP File
4005.CONBAS-A length 356mm (14″)

4005.CONBAS-A - 406mm - 3D STEP File
4005.CONBAS-A length 406mm (16″)

4005.CONBAS-A - 457mm - 3D STEP File
4005.CONBAS-A length 457mm (18″)

4005.CONBAS-A - 508mm - 3D STEP File
4005.CONBAS-A length 508mm (20″)

4005.CONBAS-A - 559mm - 3D STEP File
4005.CONBAS-A length 559mm (22″)

4005.CONBAS-A - 610mm - 3D STEP File
4005.CONBAS-A length 610mm (24″)

4005.CONBAS-A - 660mm - 3D STEP File
4005.CONBAS-A length 660mm (26″)

4005.CONBAS-A - 711mm - 3D STEP File
4005.CONBAS-A length 711mm (28″)

4005.CONBAS-A - 762mm - 3D STEP File
4005.CONBAS-A length 762mm (30″)

4005.CONBAS-A - 812mm - 3D STEP File
4005.CONBAS-A length 812mm (32″)

4005.CONBAS-A - 864mm - 3D STEP File
4005.CONBAS-A length 864mm (34″)

4005.CONBAS-A - 914mm - 3D STEP File
4005.CONBAS-A length 914mm (36″)

4005.CONBAS-A - 965mm - 3D STEP File
4005.CONBAS-A length 965mm (38″)

4005.CONBAS-A - 1016mm - 3D STEP File
4005.CONBAS-A length 1016mm (40″)

4005.CONBAS-A - 1067mm - 3D STEP File
4005.CONBAS-A length 1067mm (42″)

4005.CONBAS-A - 1117mm - 3D STEP File
4005.CONBAS-A length 1117mm (44″)

4005.CONBAS-A - 1168mm - 3D STEP File
4005.CONBAS-A length 1168mm (46″)

4005.CONBAS-A - 1219mm - 3D STEP File
4005.CONBAS-A length 1219mm (48″)

4005.CONBAS-A - 1270mm - 3D STEP File
4005.CONBAS-A length 1270mm (50″)

4005.CONBAS-A - 1321mm - 3D STEP File
4005.CONBAS-A length 1321mm (52″)

4005.CONBAS-A - 1374mm - 3D STEP File
4005.CONBAS-A length 1374mm (54″)

4005.CONBAS-A - 1422mm - 3D STEP File
4005.CONBAS-A length 1422mm (56″)

4005.CONBAS-A - 1473mm - 3D STEP File
4005.CONBAS-A length 1473mm (58″)

4005.CONBAS-A - 1524mm - 3D STEP File
4005.CONBAS-A length 1524mm (60″)

DWG Files -

4005.CONBAS - DWG FILE -
4005.CONBAS 2D DWG File

Defence

Ground, marine and air defence vehicle applications such as equipment stowage, mountings for weapon systems and racks for electronic systems

Ship Borne

Applications can range from slide based storage systems, lockers and furniture, through rack mounted electronic components, and onto operational and weapon systems requiring linear movement. If required products manufactured from high grade stainless steel can be supplied offering highest levels of corrosion resistance and low magnetic signatures.

Vehicles

Slides and bespoke sub-assemblies for mounting electronic and other equipment including weapon components on vehicles ranging from lightly armoured personnel vehicles (radio and other electronic components) through to battlefield tanks (internal storage, ammunition handling, slide-out generators and workstations).

Fire

Equipment stowage components and systems as installed on fire engines

Slide Drawers

Solid section steel slides lengths from 300mm to 2,000mm for pull-out equipment drawers. Extensions from 50% to 150% of closed length can be supplied, in addition slide systems that offer sequential dual extension with bi-directional travel allowing the drawer to extened from either side of the vehicle. This enables rescue crews to access vital equipment quickly and safely, regardless of the vehicle's orientation to the emergency scene.

Systems

Our range of reinforced heavy duty steel slides fitted with additional ball tracks and reinforceing ball bearings are ideally suited for use in some of the more unique applications. Together with a range of slides designed using a rigid "I" beam construction our products offer execelent performance under conditions that may exert high direct and tortional loadings as experienced in such applications as pull-out equipment boards and vertical shelves.

Trays

Following extensive testing on selected models our slides are used by the U.K.'s leading producers of complete equipment carriers. These complete tray systems are ready for quick installation, including bespoke mountings for specialist equipment such as auxilliary pumps, tools, hoses and rescue equipment.

Lock-in and lock-out mechanisms facilitate quick and safe operation of the equipment carrier, as well as hold the fully-loaded drawer securely in position when the vehicle is in motion or at the scene.

Special & Commercial Vehicles

Our telescopic slides and tool mounts cover even the most demanding project for commercial vehicles. Smaller, lighter duty rolled steel or solid section slides from our General Devices range will suit a keyboard tray or a display screen, whereas cold drawn steel section slides will fit requirements for full vehicle extension such as mobile broadcast vehicles carrying several 1000kg’s.

With over 30 years of experience, we are more experienced than any other supplier and manufacturer to be able to advise of suitable and performing products.

Sliding Systems are an approved supplier for many prestigious and well-regarded manufacturers both in the United Kingdom and abroad.

With our flexible production facilities, we can accommodate any project and are pleased to assist with special requests whenever possible. Applications involving shock and vibration call for heavy duty, cold drawn steel section slides which we are also able to supply in 316L marine grade stainless steel. If weight or corrosion resistance are parameters that are important we suggest Aluminium T6 section slides, available in load capacities up to 330kg.

Outdoor applications can be fixed in place with specialist marine grade 316L hooks, which safely hold tool boxes or vehicle covers in place.

Response Vehicles

Roadside assistance and other categories of vehicle that need to stow and provide easy access to equipment can be enhanced through appropriate use of telescopic drawer slide and linear rail systems.

The twin requirements of operator safety and operational effectiveness are of paramount importance. GSF's ability to select and adapt from an unrivalled base product range, and its ability to assist with the design of bespoke and space-saving drawer systems enable us to make a significant contribution to your own product design.

Ready to buy this product?

Ready to make an enquiry?

4005.CONBAS A - Enquiry

COMPANY

Sliding Systems,
Gledrid Industrial Park,
Chirk,
Wrexham,
LL14 5DG,
United Kingdom

Tel: +44 (0)1691 770303

FEEDBACK

We would like to hear from you with any feedback about our website or products.

Email us HERE

ABOUT US

Sliding Systems engineers have the experience to guide you through the selection process of choosing the right telescopic slide, linear rail or tilting drawer system. We have the widest selection of telescopic and drawer slides available, anywhere, from a few kilos to well over 4,000kg across multiple ranges specifically designed to anticipate almost every demand.

LATEST NEWS

VIEW ALL

FOLLOW US

Terms & Conditions | Trading Terms & Conditions | Privacy & Cookie Policy
© 2022 GSF Slides All rights reserved | Website by Arise Media
TOP