×

Choose Your Language

FORGOT YOUR DETAILS?

CREATE ACCOUNT

Providing quality Sliding Systems across the globe

4005.CABSLX (60kg)

4005.CABSLX INOX Cabinet Slide - Stainless Steel 316 (60kg/Pair)

The Cabinet Slide, CABSLX INOX slide has been developed for lightweight marine/offshore stowage solutions which only grade 316 stainless steel can guarantee.

The CABSLX is a lightweight, hollow section slide with pair loading up to 60kg at full extension. The slides are easy to fit with a multitude of fixing options available. Dimensions are for the closed length of the slide body. The inner beam detaches for ease of fitting.

Specification Details:

  • Space Envelope Width: 13.5mm
  • Height: 50mm
  • Closed Length: 350-700mm
  • Extension Length: 350-700mm
  • Maximum Load Capacity: 60 kg/pair
  • Number of beams: 3
  • Extension Type: Total
  • Material: Stainless Steel
  • Vibration Resistance: 2

Profile:

Suitable For:

  • DEFENCE - Airborne - Shipborne - Vehicles
  • FIRE - Slide Drawers - Systems - Trays
  • FURNITURE - Architecture & Sliding Units
  • MACHINE BUILDING - Specialised Operational Machinery
  • SPECIAL VEHICLES - Commercial & Response Vehicles

The Cabinet Slide, CABSLX INOX slide has been developed for lightweight marine/offshore stowage solutions which only grade 316 stainless steel can guarantee.

The CABSLX is non-locking, with bumper hold-close. This is a lightweight, hollow section slide with pair loading up to 60kg at full extension. The slides are easy to fit, with a detachable inner beam and are supplied un-handed. Dimensions are for the closed length of the slide body.

The slides are used in a wide variety of applications where low cost, non-corrosive, components are required. They are most commonly used in marine/offshore drawers due to their ease of fitting and price point. Tested to 10,000 cycles on full load, the slides are light in weight, with the 500mm (20") weighing only 0.6Kg each.

These telescopic slides are pre-drilled with a flexible fixing pattern enabling them to be ready-to-fit in most standard applications. Full details of the fixing patterns and lengths and loads are set out on the datasheet. The beams are manufactured from austenitic AISI 316 (Inox 1.4401) stainless steel. Stainless steel bearings are made from austenitic AISI 304 (Inox 1.4301). Inner ball cage material is stainless AISI 201 (Inox 1.4372). End stops, outer beam ball strips and inner beam release latch are made from a combination of rubber and PVC, so this slide is not suitable for use in high temperature applications. The slides are stocked across all lengths, covering key drawer dimensions.

Prices and load ratings are per pair. Non-locking CABSLX are unhanded. Discounts for OEM volumes are available. Loads are stated at full extension when the slide is uniformly mounted on the direct axis (not flat). For applications involving excess shock & vibration we recommend our solid section stainless steel 316L SDTS slides in the Professional Range.

The CABSLX slide can be purchased online, for global delivery by follwing this link. The CABSLX is stocked across all lengths in volume. For OEM volume prices please consult our sales engineers.

* There are no CAD files available for this product, if you have any questions then please call us on +44 (0)1691 770303 between 9am-5pm GMT, or alternatively click here to contact us by email.

Code

Closed Length (mm)

Extension (mm)

Max Load Capacity (kg)
4005.CABSLX.0350 350mm 350mm 60kg
4005.CABSLX.0400 400mm 400mm 60kg
4005.CABSLX.0450 450mm 450mm 60kg
4005.CABSLX.0500 500mm 500mm 60kg
4005.CABSLX.0550 550mm 550mm 60kg
4005.CABSLX.0600 600mm 600mm 60kg
4005.CABSLX.0650 650mm 650mm 60kg
4005.CABSLX.0700 700mm 700mm 60kg

Downloads Access

To download the CAD files and specifications for this product you need to be logged in.

Data Sheets -

4005.CABSLX 350mm

4005.CABSLX 400mm

4005.CABSLX 450mm

4005.CABSLX 500mm

4005.CABSLX 550mm

4005.CABSLX 600mm

4005.CABSLX 700mm

Defence

Ground, marine and air defence vehicle applications such as equipment stowage, mountings for weapon systems and racks for electronic systems

Ship Borne

Applications can range from slide based storage systems, lockers and furniture, through rack mounted electronic components, and onto operational and weapon systems requiring linear movement. If required products manufactured from high grade stainless steel can be supplied offering highest levels of corrosion resistance and low magnetic signatures.

Vehicles

Slides and bespoke sub-assemblies for mounting electronic and other equipment including weapon components on vehicles ranging from lightly armoured personnel vehicles (radio and other electronic components) through to battlefield tanks (internal storage, ammunition handling, slide-out generators and workstations).

Fire

Equipment stowage components and systems as installed on fire engines

Slide Drawers

Solid section steel slides lengths from 300mm to 2,000mm for pull-out equipment drawers. Extensions from 50% to 150% of closed length can be supplied, in addition slide systems that offer sequential dual extension with bi-directional travel allowing the drawer to extened from either side of the vehicle. This enables rescue crews to access vital equipment quickly and safely, regardless of the vehicle's orientation to the emergency scene.

Systems

Our range of reinforced heavy duty steel slides fitted with additional ball tracks and reinforceing ball bearings are ideally suited for use in some of the more unique applications. Together with a range of slides designed using a rigid "I" beam construction our products offer execelent performance under conditions that may exert high direct and tortional loadings as experienced in such applications as pull-out equipment boards and vertical shelves.

Trays

Following extensive testing on selected models our slides are used by the U.K.'s leading producers of complete equipment carriers. These complete tray systems are ready for quick installation, including bespoke mountings for specialist equipment such as auxilliary pumps, tools, hoses and rescue equipment.

Lock-in and lock-out mechanisms facilitate quick and safe operation of the equipment carrier, as well as hold the fully-loaded drawer securely in position when the vehicle is in motion or at the scene.

Furniture & Architecture

We are delighted to be able to advise our customers on the most diverse projects possible.

One day we could be talking to an ambitious DIY customer who wants to install a removable console tray in his game room and the next project could be a whole building interior refurbishment destined for micro flats. Whilst each project represents different challenges and requirements we are confident in finding a suitable slide or linear rail.

Standard furniture fittings will suit the Thomas Regout or Fulterer range of rolled steel slides and linear rail. Whereas high end architectural furniture design may call for aluminium drawer slides, such as the 8027/8028 or the aluminium T6 slide from our professional range.

To suit yacht interior design, we can supply Viadana chandlery and stainless steel 316L telescopic slides.

Machine Building

The design and construction of speciialised operational machinery and machine guards. The excellent range of Saibo hardened linear rails are designed to be economical whilst offering exceptional service life required in machine guarding.

General

Specification and design of linear movement systems incorporating linear rails and telescopic slides for use in machine guarding applications and the design and installation of manufacturing, cargo handling and other situation specific plant and machinery.

In such industrial applications, reliability and robustness are key requirements. When incorporated into automated plant, movement precision is also vital. The load capacities indicated on our high-end range represent the maximum load that can be carried whilst causing a slide deflection at full extension of no more than 1% of the slide's closed length. This is a much higher and more rigorous standard than is typically used by others for measuring slide load capacities, as a results our customers have come to rely on Sliding System's products for their durability and strength.

Our range also includes slides that operate with ultra-high precision based on innovative roller bearing technology, and which are self aligning.

Our design team has the ability to offer all or any of these components when working alongside your own engineering team.

Special & Commercial Vehicles

Our telescopic slides and tool mounts cover even the most demanding project for commercial vehicles. Smaller, lighter duty rolled steel or solid section slides from our General Devices range will suit a keyboard tray or a display screen, whereas cold drawn steel section slides will fit requirements for full vehicle extension such as mobile broadcast vehicles carrying several 1000kg’s.

With over 30 years of experience, we are more experienced than any other supplier and manufacturer to be able to advise of suitable and performing products.

Sliding Systems are an approved supplier for many prestigious and well-regarded manufacturers both in the United Kingdom and abroad.

With our flexible production facilities, we can accommodate any project and are pleased to assist with special requests whenever possible. Applications involving shock and vibration call for heavy duty, cold drawn steel section slides which we are also able to supply in 316L marine grade stainless steel. If weight or corrosion resistance are parameters that are important we suggest Aluminium T6 section slides, available in load capacities up to 330kg.

Outdoor applications can be fixed in place with specialist marine grade 316L hooks, which safely hold tool boxes or vehicle covers in place.

Response Vehicles

Roadside assistance and other categories of vehicle that need to stow and provide easy access to equipment can be enhanced through appropriate use of telescopic drawer slide and linear rail systems.

The twin requirements of operator safety and operational effectiveness are of paramount importance. GSF's ability to select and adapt from an unrivalled base product range, and its ability to assist with the design of bespoke and space-saving drawer systems enable us to make a significant contribution to your own product design.

Ready to buy this product?

Ready to make an enquiry?

4005.CABSLX Enquiry

COMPANY

Sliding Systems,
Gledrid Industrial Park,
Chirk,
Wrexham,
LL14 5DG,
United Kingdom

Tel: +44 (0)1691 770303

FEEDBACK

We would like to hear from you with any feedback about our website or products.

Email us HERE

ABOUT US

Sliding Systems engineers have the experience to guide you through the selection process of choosing the right telescopic slide, linear rail or tilting drawer system. We have the widest selection of telescopic and drawer slides available, anywhere, from a few kilos to well over 4,000kg across multiple ranges specifically designed to anticipate almost every demand.

LATEST NEWS

VIEW ALL

FOLLOW US

Terms & Conditions | Trading Terms & Conditions | Privacy & Cookie Policy
© 2022 GSF Slides All rights reserved | Website by Arise Media
TOP