Sliding Systems has entered into a new distribution agreement with Regout Balance...
LIMIT SWITCHES - TELESCOPIC ACTUATORS
Electronic device applied on telescopic actuators, can be easily adjusted on the actuator body itself. The presence of the red LED that shows the state of activity of the sensor and the M4 grain used for the locking of the limit switch ring on the body of the actuator, make it an easily configurable component. Interfaceable with many control electronics, it is used as limit switch (forward/backward).
Sold ONLY in coupling with the telescopic actuator.
This product is available to buy online from our promounts store here
OUTPUT CABLES |
CONNECTIONS |
|---|---|
| Brown | + (10/24 Vdc) |
| White | - (GND) |
| Yellow | signal selection (DO NOT connect to obtain PNP output) |
| Green | output (PNP signal) |
| NOTE | to obtain NPN output signal, connect YELLOW and WHITE cable together |
GENERAL SPECIFICATIONS |
VALUES |
|---|---|
| Working voltage | 10/24 Vdc |
| Cable length | 1.8m |
| Operating temperature | -10°C / +70°C |
| Protection | IP54 |
| Output current (max) | 100ma |
| Operating status | Red LED |
4015.ADTS040 – ADTS-40