×

Choose Your Language

FORGOT YOUR DETAILS?

CREATE ACCOUNT

Providing quality Sliding Systems across the globe

4005.CONRBKT (Mounting Brackets)

4005.CONRBKT (Mounting Brackets) - Container Red Fully Locking Multi-Mount Bracket

Container Red slides can be supplied with a single floor or drawer mount bracket fitted. The brackets are designed to fit locking and non-locking slides and supplied as a complete LH & RH pair.

The 3mm plated steel L brackets are secured by bolts and steel/nylon lock nuts so they are removable and can be re-fitted for multiple positions. There are four lengths of brackets: 305, 406, 558 and 711mm. They are pre-drilled to secure on to our standard Container slide drilling pattern to both inner and outer beams. By using the brackets in multiples of 1, 2 or 4 we can fit to all slide lengths 304-1524mm.

Specification Details:

  • Space Envelope Width: 42mm
  • Height: 61mm
  • Closed Length: 304-1524mm
  • Extension Length: 304-1524mm
  • Maximum Load Capacity: 130-250 kg/pair
  • Number of beams: 1
  • Extension Type: N/A
  • Material: Zinc plated steel
  • Vibration Resistance: 5

Profile:

Suitable For:

  • DEFENCE - Airborne - Shipborne - Vehicles
  • FIRE - Slide Drawers - Systems - Trays
  • FURNITURE - Architecture & Sliding Units
  • MACHINE BUILDING - Specialised Operational Machinery
  • SPECIAL VEHICLES - Commercial & Response Vehicles

Container Red slides can be supplied with a single floor or drawer mount bracket fitted. The brackets are designed to fit locking and non-locking slides and supplied as a complete LH & RH pair.

The 3mm plated steel L brackets are secured by bolts and steel/nylon lock nuts so they are removable and can be re-fitted for multiple positions. There are four lengths of brackets: 305, 406, 558 and 711mm. They are pre-drilled to secure on to our standard Container slide drillings to both inner and outer beams. By using the brackets in multiples of 1, 2 or 4 we can fit to all slide lengths 304-1524mm. Supplied as a complete LH & RH set with a single bracket fitted to each slide

The slides and brackets are supplied fitted as a complete LH & RH pair, so we select the right brackets for your chosen slide length. The bracket is also drilled to secure to the vehicle floor (bolts not supplied). Slides can be supplied with the loose brackets if preferred. We always supply as a a pair. Should you require the slides fitted with a bracket on each beam, so they mount to both floor and drawer, we have CONBAS fully locking base-mounts.

Select whether you require locking or non-locking Container Slides, select the length, add the bracket option (A, B, C or D) and we do the rest!

3D CAD Views for all options

Code

Closed Length (mm)

Extension (mm)

Max Load Capacity (kg)
4005.CONRBKT.012 304mm 304mm 130kg
4005.CONRBKT.014 356mm 356mm 180kg
4005.CONRBKT.016 406mm 406mm 250kg
4005.CONRBKT.018 457mm 457mm 250kg
4005.CONRBKT.020 508mm 508mm 250kg
4005.CONRBKT.022 559mm 559mm 250kg
4005.CONRBKT.024 610mm 610mm 250kg
4005.CONRBKT.026 660mm 660mm 250kg
4005.CONRBKT.028 711mm 711mm 250kg
4005.CONRBKT.030 762mm 762mm 230kg
4005.CONRBKT.032 812mm 812mm 230kg
4005.CONRBKT.034 864mm 864mm 230kg
4005.CONRBKT.036 914mm 914mm 230kg
4005.CONRBKT.038 965mm 965mm 230kg
4005.CONRBKT.040 1016mm 1016mm 230kg
4005.CONRBKT.042 1067mm 1067mm 230kg
4005.CONRBKT.044 1117mm 1117mm 200kg
4005.CONRBKT.046 1168mm 1168mm 200kg
4005.CONRBKT.048 1219mm 1219mm 200kg
4005.CONRBKT.050 1270mm 1270mm 200kg
4005.CONRBKT.052 1321mm 1321mm 200kg
4005.CONRBKT.054 1372mm 1372mm 200kg
4005.CONRBKT.056 1422mm 1422mm 200kg
4005.CONRBKT.058 1473mm 1473mm 200kg
4005.CONRBKT.060 1524mm 1524mm 200kg

Downloads Access

To download the CAD files and specifications for this product you need to be logged in.

Data Sheet & product information -

4005.CONRBKT Datasheet

2D Datasheet -

4005.CONRBKT 2D

4005.CONRBKT - DWG File -

4005.CONRBKT 2D DWG File

4005.CONRBKT-A length 305mm (12″)

4005.CONRBKT-A length 356mm (14″)

4005.CONRBKT-A length 406mm (16″)

4005.CONRBKT-A length 457mm (18″)

4005.CONRBKT-A length 508mm (20″)

4005.CONRBKT-A length 559mm (22″)

4005.CONRBKT-A length 610mm (24″)

4005.CONRBKT-A length 660mm (26″)

4005.CONRBKT-A length 711mm (28″)

4005.CONRBKT-A length 762mm (30″)

4005.CONRBKT-A length 812mm (32″)

4005.CONRBKT-A length 864mm (34″)

4005.CONRBKT-A length 914mm (36″)

4005.CONRBKT-A length 965mm (38″)

4005.CONRBKT-A length 1016mm (40″)

4005.CONRBKT-A length 1067mm (42″)

4005.CONRBKT-A length 1117mm (44″)

4005.CONRBKT-A length 1168mm (46″)

4005.CONRBKT-A length 1219mm (48″)

4005.CONRBKT-A length 1270mm (50″)

4005.CONRBKT-A length 1321mm (52″)

4005.CONRBKT-A length 1374mm (54″)

4005.CONRBKT-A length 1422mm (56″)

4005.CONRBKT-A length 1473mm (58″)

4005.CONRBKT-A length 1524mm (60″)

4005.CONRBKT-B length 305mm (12″)

4005.CONRBKT-B length 356mm (14″)

4005.CONRBKT-B length 406mm (16″)

4005.CONRBKT-B length 457mm (18″)

4005.CONRBKT-B length 508mm (20″)

4005.CONRBKT-B length 559mm (22″)

4005.CONRBKT-B length 610mm (24″)

4005.CONRBKT-B length 660mm (26″)

4005.CONRBKT-B length 711mm (28″)

4005.CONRBKT-B length 762mm (30″)

4005.CONRBKT-B length 812mm (32″)

4005.CONRBKT-B length 864mm (34″)

4005.CONRBKT-B length 914mm (36″)

4005.CONRBKT-B length 965mm (38″)

4005.CONRBKT-B length 1016mm (40″)

4005.CONRBKT-B length 1067mm (42″)

4005.CONRBKT-B length 1117mm (44″)

4005.CONRBKT-B length 1168mm (46″)

4005.CONRBKT-B length 1219mm (48″)

4005.CONRBKT-B length 1270mm (50″)

4005.CONRBKT-B length 1321mm (52″)

4005.CONRBKT-B length 1374mm (54″)

4005.CONRBKT-B length 1422mm (56″)

4005.CONRBKT-B length 1473mm (58″)

4005.CONRBKT-B length 1524mm (60″)

4005.CONRBKT-C length 305mm (12″)

4005.CONRBKT-C length 356mm (14″)

4005.CONRBKT-C length 406mm (16″)

4005.CONRBKT-C length 457mm (18″)

4005.CONRBKT-C length 508mm (20″)

4005.CONRBKT-C length 559mm (22″)

4005.CONRBKT-C length 610mm (24″)

4005.CONRBKT-C length 660mm (26″)

4005.CONRBKT-C length 711mm (28″)

4005.CONRBKT-C length 762mm (30″)

4005.CONRBKT-C length 812mm (32″)

4005.CONRBKT-C length 864mm (34″)

4005.CONRBKT-C length 914mm (36″)

4005.CONRBKT-C length 965mm (38″)

4005.CONRBKT-C length 1016mm (40″)

4005.CONRBKT-C length 1067mm (42″)

4005.CONRBKT-C length 1117mm (44″)

4005.CONRBKT-C length 1168mm (46″)

4005.CONRBKT-C length 1219mm (48″)

4005.CONRBKT-C length 1270mm (50″)

4005.CONRBKT-C length 1321mm (52″)

4005.CONRBKT-C length 1374mm (54″)

4005.CONRBKT-C length 1422mm (56″)

4005.CONRBKT-C length 1473mm (58″)

4005.CONRBKT-C length 1524mm (60″)

4005.CONRBKT-D length 305mm (12″)

4005.CONRBKT-D length 356mm (14″)

4005.CONRBKT-D length 406mm (16″)

4005.CONRBKT-D length 457mm (18″)

4005.CONRBKT-D length 508mm (20″)

4005.CONRBKT-D length 559mm (22″)

4005.CONRBKT-D length 610mm (24″)

4005.CONRBKT-D length 660mm (26″)

4005.CONRBKT-D length 711mm (28″)

4005.CONRBKT-D length 762mm (30″)

4005.CONRBKT-D length 812mm (32″)

4005.CONRBKT-D length 864mm (34″)

4005.CONRBKT-D length 914mm (36″)

4005.CONRBKT-D length 965mm (38″)

4005.CONRBKT-D length 1016mm (40″)

4005.CONRBKT-D length 1067mm (42″)

4005.CONRBKT-D length 1117mm (44″)

4005.CONRBKT-D length 1168mm (46″)

4005.CONRBKT-D length 1219mm (48″)

4005.CONRBKT-D length 1270mm (50″)

4005.CONRBKT-D length 1321mm (52″)

4005.CONRBKT-D length 1374mm (54″)

4005.CONRBKT-D length 1422mm (56″)

4005.CONRBKT-D length 1473mm (58″)

4005.CONRBKT-D length 1524mm (60″)

Defence

Ground, marine and air defence vehicle applications such as equipment stowage, mountings for weapon systems and racks for electronic systems

Ship Borne

Applications can range from slide based storage systems, lockers and furniture, through rack mounted electronic components, and onto operational and weapon systems requiring linear movement. If required products manufactured from high grade stainless steel can be supplied offering highest levels of corrosion resistance and low magnetic signatures.

Vehicles

Slides and bespoke sub-assemblies for mounting electronic and other equipment including weapon components on vehicles ranging from lightly armoured personnel vehicles (radio and other electronic components) through to battlefield tanks (internal storage, ammunition handling, slide-out generators and workstations).

Fire

Equipment stowage components and systems as installed on fire engines

Slide Drawers

Solid section steel slides lengths from 300mm to 2,000mm for pull-out equipment drawers. Extensions from 50% to 150% of closed length can be supplied, in addition slide systems that offer sequential dual extension with bi-directional travel allowing the drawer to extened from either side of the vehicle. This enables rescue crews to access vital equipment quickly and safely, regardless of the vehicle's orientation to the emergency scene.

Systems

Our range of reinforced heavy duty steel slides fitted with additional ball tracks and reinforceing ball bearings are ideally suited for use in some of the more unique applications. Together with a range of slides designed using a rigid "I" beam construction our products offer execelent performance under conditions that may exert high direct and tortional loadings as experienced in such applications as pull-out equipment boards and vertical shelves.

Trays

Following extensive testing on selected models our slides are used by the U.K.'s leading producers of complete equipment carriers. These complete tray systems are ready for quick installation, including bespoke mountings for specialist equipment such as auxilliary pumps, tools, hoses and rescue equipment.

Lock-in and lock-out mechanisms facilitate quick and safe operation of the equipment carrier, as well as hold the fully-loaded drawer securely in position when the vehicle is in motion or at the scene.

Furniture & Architecture

We are delighted to be able to advise our customers on the most diverse projects possible.

One day we could be talking to an ambitious DIY customer who wants to install a removable console tray in his game room and the next project could be a whole building interior refurbishment destined for micro flats. Whilst each project represents different challenges and requirements we are confident in finding a suitable slide or linear rail.

Standard furniture fittings will suit the Thomas Regout or Fulterer range of rolled steel slides and linear rail. Whereas high end architectural furniture design may call for aluminium drawer slides, such as the 8027/8028 or the aluminium T6 slide from our professional range.

To suit yacht interior design, we can supply Viadana chandlery and stainless steel 316L telescopic slides.

Machine Building

The design and construction of speciialised operational machinery and machine guards. The excellent range of Saibo hardened linear rails are designed to be economical whilst offering exceptional service life required in machine guarding.

General

Specification and design of linear movement systems incorporating linear rails and telescopic slides for use in machine guarding applications and the design and installation of manufacturing, cargo handling and other situation specific plant and machinery.

In such industrial applications, reliability and robustness are key requirements. When incorporated into automated plant, movement precision is also vital. The load capacities indicated on our high-end range represent the maximum load that can be carried whilst causing a slide deflection at full extension of no more than 1% of the slide's closed length. This is a much higher and more rigorous standard than is typically used by others for measuring slide load capacities, as a results our customers have come to rely on Sliding System's products for their durability and strength.

Our range also includes slides that operate with ultra-high precision based on innovative roller bearing technology, and which are self aligning.

Our design team has the ability to offer all or any of these components when working alongside your own engineering team.

Special & Commercial Vehicles

Our telescopic slides and tool mounts cover even the most demanding project for commercial vehicles. Smaller, lighter duty rolled steel or solid section slides from our General Devices range will suit a keyboard tray or a display screen, whereas cold drawn steel section slides will fit requirements for full vehicle extension such as mobile broadcast vehicles carrying several 1000kg’s.

With over 30 years of experience, we are more experienced than any other supplier and manufacturer to be able to advise of suitable and performing products.

Sliding Systems are an approved supplier for many prestigious and well-regarded manufacturers both in the United Kingdom and abroad.

With our flexible production facilities, we can accommodate any project and are pleased to assist with special requests whenever possible. Applications involving shock and vibration call for heavy duty, cold drawn steel section slides which we are also able to supply in 316L marine grade stainless steel. If weight or corrosion resistance are parameters that are important we suggest Aluminium T6 section slides, available in load capacities up to 330kg.

Outdoor applications can be fixed in place with specialist marine grade 316L hooks, which safely hold tool boxes or vehicle covers in place.

Response Vehicles

Roadside assistance and other categories of vehicle that need to stow and provide easy access to equipment can be enhanced through appropriate use of telescopic drawer slide and linear rail systems.

The twin requirements of operator safety and operational effectiveness are of paramount importance. GSF's ability to select and adapt from an unrivalled base product range, and its ability to assist with the design of bespoke and space-saving drawer systems enable us to make a significant contribution to your own product design.

Ready to buy this product?

Ready to make an enquiry?

4005.CONRBKT Enquiry

COMPANY

Sliding Systems,
Gledrid Industrial Park,
Chirk,
Wrexham,
LL14 5DG,
United Kingdom

Tel: +44 (0)1691 770303

FEEDBACK

We would like to hear from you with any feedback about our website or products.

Email us HERE

ABOUT US

Sliding Systems engineers have the experience to guide you through the selection process of choosing the right telescopic slide, linear rail or tilting drawer system. We have the widest selection of telescopic and drawer slides available, anywhere, from a few kilos to well over 4,000kg across multiple ranges specifically designed to anticipate almost every demand.

LATEST NEWS

VIEW ALL

FOLLOW US

Terms & Conditions | Trading Terms & Conditions | Privacy & Cookie Policy
© 2022 GSF Slides All rights reserved | Website by Arise Media
TOP