FORGOT YOUR DETAILS?

CREATE ACCOUNT

Dünya çapında kaliteli Sürme Sistemleri sağlamak

R80 Aluminium Radial Rail (70-280kg)

4013.R80 (Linear Rail) - R80 Aluminium Radial Rail (70-280kg)

Aluminium Radial Rails are a cost effective but high quality benchmark in light to medium duty linear motion. Manufactured via the same process as our Radial Telescopic Slides,
these have a milled raceway which precisely supports the sealed rollers, ensuring full radial contact and eliminating brinelling.

The rails come in three profile sizes - 32, 52 and 80mm supplied in any length up to 5 metres. Rails are supplied undrilled as standard, with centrelines clearly marked.
We can supply rail cut and drilled to customer own requirements upon request.

Şartname Detayları:

  • Space Envelope Width: 33.5mm
  • Height: 80mm
  • Rail Length: 500-2700mm
  • Maximum Load Capacity: 70-280 kg/pair
  • Number of beams: 1
  • Extension Type: N/A
  • Material: Aluminium

Profil:

İçin uygundur:

  • MOBİLYA - Mimari ve Sürgülü Üniteler
  • INDUSTRIAL STORAGE - Museum & Workspace Storage
  • LINEAR - Sliding Systems
  • MAKİNE İNŞAATI - Özel Operasyonel Makineler
  • MARINE - Non-Corrosive - Merchant Vessels - Oil Rigs
  • SPECIAL VEHICLES - Commerical & Response Vehicles

Aluminium Radial Rails are a cost effective but high quality benchmark in light to medium duty linear motion. Manufactured via the same process as our Radial Telescopic Slides, these have a milled raceway which precisely supports the sealed rollers, ensuring full radial contact and eliminating brinelling.

The rails come in three profile sizes - 32, 52 and 80mm supplied in any length up to 5 metres. Rails are supplied undrilled as standard, with centrelines clearly marked. We can supply rail cut and drilled to customer own requirements upon request.

The carriers come in 3 and 5 bearing lengths for increased stability. Steel bearings are fitted for strength, with Delrin bearings for noise and weight reduction. The carriers are supplied pre-loaded and fitted to each rail. Bearings are customer adjustable to increase or decrease factory settings. Carriers can be detached from the rail without loss of bearings.

Rails ve carriers are purchased separately and any quantity can be fitted per rail. If required, rails can be continuously joined. Loads stated are PER CARRIER on the direct axis and will be increased accordingly to how many are fitted and how they are mounted. The load data is reduced by 50% if the rail & carriers are mounted flat, also the rail must be totally supported to achieve maximum loading.

The R80 Rail fitted with carrier has a height of 80mm and a width of 33.50mm. The R80 5 bearing carrier has an individual load capacity of 700N, Whilst the 3 bearing version can take 600N. This is increased by adding additional carriers.

Order Codes:
CAR3 is a 3 bearing carrier
CAR5 is a 5 bearing carrier
D = Delrin (for silent use): S = Steel (for higher strength)

Available ex-stock, usually on a same day despatch, the rails are supplied undrilled and without end stops as standard. Upon customer request, we can manufacture these to drawing.

R80 Rails can be purchased online for global delivery by following this link to our web-shop

R80 Carriers can be purchased online for global delivery by following this link to our web-shop

CAD file shown is the CAR5 (5-bearing carrier)

Code

kapalı uzunluk (mm)

Uzatma (mm)

Maksimum Yük Kapasitesi (kg)
4013.R80.CAR3 120mm 0mm 60kg
4013.R80.CAR5 220mm 0mm 70kg
4013.R80.0500 500mm 0mm 0kg
4013.R80.1000 1000mm 0mm 0kg
4013.R80.1500 1500mm 0mm 0kg
4013.R80.2000 2000mm 0mm 0kg
4013.R80.2500 2500mm 0mm 0kg
4013.R80.3000 3000mm 0mm 0kg
4013.R80.3500 3500mm 0mm 0kg
4013.R80.4000 4000mm 0mm 0kg
4013.R80.4500 4500mm 0mm 0kg
4013.R80.5000 5000mm 0mm 0kg

İndirmeler Erişim

Bu ürünün CAD dosyalarını ve teknik özelliklerini indirmek için giriş yapmış olmanız gerekmektedir.

Veri Sayfası ve ana ürün bilgileri -

4013.R80 Radial Rail Datasheet

2D Veri Sayfası -

4013.R80 2D Carrier PDF

Rail Length 500mm + Car 5 - 3D STEP File
4013.R80 Rail Length 500mm + CAR 5

Rail Length 1000mm + Car 5 - 3D STEP File
4013.R80 Rail Length 1000mm + CAR 5

Rail Length 1500mm + Car 5 - 3D STEP File
4013.R80 Rail Length 1500mm + CAR 5

Rail Length 2000mm + Car 5 - 3D STEP File
4013.R80 Rail Length 2000mm + CAR 5

Rail Length 2500mm + Car 5 - 3D STEP File
4013.R80 Rail Length 2500mm + CAR 5

Rail Length 3000mm + Car 5 - 3D STEP File
4013.R80 Rail Length 3000mm + CAR 5

Rail Length 3500mm + Car 5 - 3D STEP File
4013.R80 Rail Length 3500mm + CAR 5

Rail Length 4000mm + Car 5 - 3D STEP File
4013.R80 Rail Length 4000mm + CAR 5

Rail Length 4500mm + Car 5 - 3D STEP File
4013.R80 Rail Length 4500mm + CAR 5

Rail Length 5000mm + Car 5 - 3D STEP File
4013.R80 Rail Length 5000mm + CAR 5

DWG Files -

4013.R80 Carrier - DWG FILE
4013.R80 2D Carrier DWG File

Mobilya ve Mimarlık

Müşterilerimize mümkün olan en çeşitli projeler hakkında tavsiyelerde bulunabilmekten mutluluk duyuyoruz.

Bir gün oyun odasına çıkarılabilir bir konsol tepsisi kurmak isteyen hırslı bir DIY müşterisiyle konuşuyor olabiliriz ve bir sonraki proje mikro daireler için tasarlanmış tüm bir bina iç tadilatı olabilir. Her proje farklı zorlukları ve gereksinimleri temsil ederken, uygun bir kızak veya lineer ray bulma konusunda kendimize güveniyoruz.

Standart mobilya donanımları Thomas Regout veya Fulterer haddelenmiş çelik kızak ve lineer ray yelpazesi. Üst düzey mimari mobilya tasarımlarında alüminyum çekmece rayları kullanılırken, örneğin 8027/8028 veya alüminyum T6 kızaklarımızdan professional range.

Yatın iç tasarımına uygun olarak Viadana şamandıra ve paslanmaz çelik 316L teleskopik kızaklar tedarik edebiliriz.

Endüstriyel Depolama

In-rack drawers and bespoke storage systems and assemblies

Museum Storage

The breadth of GSF's product range gives you an unparalled advantage when engineering solutions for unique storage systems that have to accomodate large irregular shaped artifacts or exhibits. Our experience with some of the more unusual high volume low load applications and environmentally sensitive storage conditions is available for you to call upon together with access to perhaps the widest range of sliding procuts in the world.

Correct selection and specification of the slide system will ensure maximisation of the space inside the storage or display unit while providing safe and secure access when required.

Workspace Storage

GSF offers a wide range of standardised products that are available direct from stock and which are most suitable for use in workspace desking, tool storage, assembly and operation stations. These products can be purchased free of restrictive minimum order quantities and charges.

Linear

Linear slide systems are designed to support and transfer loads over distance and an be used for either horizontal or vertical movements.

Internal Doors

Linear Rail is generally the preferred component for mounting internal sliding doors.

Makine İmalatı

Özel operasyonel makinelerin ve makine korumalarının tasarımı ve yapımı. Saibo'nun mükemmel sertleştirilmiş lineer ray serisi, makine korumasında gerekli olan olağanüstü hizmet ömrünü sunarken ekonomik olacak şekilde tasarlanmıştır.

Genel

Makine koruma uygulamalarında kullanılmak üzere lineer raylar ve teleskopik kızaklar içeren lineer hareket sistemlerinin spesifikasyonu ve tasarımı ile imalat, kargo taşıma ve diğer duruma özel tesis ve makinelerin tasarımı ve kurulumu.

Bu tür endüstriyel uygulamalarda güvenilirlik ve sağlamlık temel gerekliliklerdir. Otomatik tesislere dahil edildiğinde, hareket hassasiyeti de hayati önem taşır. Üst düzey ürün yelpazemizde belirtilen yük kapasiteleri, tam uzatmada kızağın kapalı uzunluğunun %1'inden daha fazla olmayan bir kızak sapmasına neden olurken taşınabilecek maksimum yükü temsil eder. Bu, kızak yük kapasitelerini ölçmek için tipik olarak başkaları tarafından kullanılandan çok daha yüksek ve daha titiz bir standarttır, sonuç olarak müşterilerimiz dayanıklılıkları ve güçleri için Sliding System ürünlerine güvenmeye başlamışlardır.

Ürün yelpazemizde ayrıca yenilikçi makaralı rulman teknolojisine dayalı ultra yüksek hassasiyetle çalışan ve kendinden hizalamalı kızaklar da bulunmaktadır.

Tasarım ekibimiz, kendi mühendislik ekibinizle birlikte çalışırken bu bileşenlerin tümünü veya herhangi birini sunma yeteneğine sahiptir.

Marine - Non Corrosive

Depolama ihtiyacı kara yapılarıyla sınırlı değildir, denize uygun her yapı çok sayıda çekmece veya ağır hizmet tipi jeneratör tepsisi gerektirir. En geniş paslanmaz çelik 316L teleskopik kızak ve korozif olmayan alet bağlantıları yelpazesini sunabiliriz.

For interior fittings we suggest 304 stainless steel slides, larger heavy-duty applications are covered with our specialist bottom mount General Devices D1050/D1054 slide. The latter allows the user to look a generator tray in the opened and closed position. Bottom mount slides are useful for applications where space is limited thus a traditional drawer slide installation is not suitable. The poxy coating offers some corrosion resistance but achieve full corrosion resistance, we suggest stainless steel 316L which can be supplied upon customer request.

Our full professional range DTS is now available in marine grade stainless steel 316L which includes the end stops and ball cages. With low profiles starting from 40mm up to profile height and lengths up to 2000mm we are confident to be able to supply a complete range.

As a distributor of the prestigious yacht and boating equipment manufacturer Viadana SRL, we are also able to support your yachting project with their full chandlery range.

Merchant Vessels

Applications can range from slide based storage systems, lockers and furniture, through rack mounted electronic components, and onto operational systems requiring linear movement.

Whether specifying product for a 19" electronic rack or to mount standby generator, the telescopic slide system needs to retain rigidity and be safe to operate despite ship motion and vibration.

Our range includes heavy duty stainless steel slides (partial or full extension), and can be bespoke engineered with a range of options in respect of surface hardening, strengthening and corrosion resistant finishes to ensure flawless operation in the chosen application.

With its extensive expertise and design capability we can work closely with your own engineering team to design and produce complete drawer sub-assemblies, taking account of all the special characteristics required for the product to work effectively in the marine environment.

Oil Rigs

Telescopic slide components for storage and equipment stowage areas; slide and linear rail components for operational machinery. Whilst offshore installations are generally static structures and so do not require the telescopic slide components to be able to withstand the same dynamic forces, issues of corrosion and the ability to operate reliably in the marine environment remain unchanged.

From high precision roller-bearing slides and systems through to standard stainless steel slides for use in staff accommodation areas, we are able to provide expert input and select an appropriate product from its range to match the application.

Motor Manufacturing Plant

Telescopic Slide and Linear Rail components for lineside delivery and component handling systems

Automated Production Lines

Linear movement components and telescopic slides for use on repetition-intensive automated production lines. Components require a high resistance to localised wear patterns, uniform operating loads and designs capable of working at fast speeds with high accelerations.

Manually Operated

Linear rail and telescopic slide products for component delivery and handling at line-sideassembly stations.

The breadth of our product range gives you an unparalleled advantage when engineering solutions for delivery systems that have to accommodate large irregular shaped components or sub assemblies within space restricted line-side delivery stillages.

Correct selection and specification of the slide system will ensure maximisation of the space inside the delivery stillage and production efficiency while accommodating the natural variations of manual handling present in a time sensitive assembly environment.

Bu ürünü satın almaya hazır mısınız?

Talepte bulunmaya hazır mısınız?

4013.R80 Radial Slide Enquiry

ŞİRKET

Sliding Systems,
Gledrid Industrial Park,
Chirk,
Wrexham,
LL14 5DG,
United Kingdom

Tel: +44 (0)1691 770303

GERİ BİLDİRİM

Web sitemiz veya ürünlerimiz hakkında her türlü geri bildiriminizi duymak isteriz.

Bize e-posta gönderin İŞTE

HAKKIMIZDA

Sliding Systems mühendisleri, doğru teleskopik kızak, lineer ray veya eğilebilir çekmece sistemini seçme sürecinde size rehberlik edecek deneyime sahiptir. Neredeyse tüm talepleri karşılamak üzere özel olarak tasarlanmış çok sayıda ürün yelpazesinde birkaç kilodan 4.000 kg'ın üzerine kadar her yerde mevcut olan en geniş teleskopik ve çekmece kızağı yelpazesine sahibiz.

SON HABERLER

VIEW ALL

BİZİ TAKİP EDİN

Terms & Conditions | Trading Terms & Conditions | Privacy & Cookie Policy
© 2022 GSF Slides All rights reserved | Website by Arise Media
ÜST