Aluminium Radial Rails are a cost effective but high quality benchmark in light to medium duty linear motion. Manufactured via the same process as our Radial Telescopic Slides, these have a milled raceway which precisely supports the sealed rollers, ensuring full radial contact and eliminating brinelling.
The rails come in three profile sizes - 32, 52 and 80mm supplied in any length up to 5 metres. Rails are supplied undrilled as standard, with centrelines clearly marked. We can supply rail cut and drilled to customer own requirements upon request.
The carriers come in 3 and 5 bearing lengths for increased stability. Steel bearings are fitted for strength, with Delrin bearings for noise and weight reduction. The carriers are supplied pre-loaded and fitted to each rail. Bearings are customer adjustable to increase or decrease factory settings. Carriers can be detached from the rail without loss of bearings.
Rails und carriers are purchased separately and any quantity can be fitted per rail. If required, rails can be continuously joined. Loads stated are PER CARRIER on the direct axis and will be increased accordingly to how many are fitted and how they are mounted. The load data is reduced by 50% if the rail & carriers are mounted flat, also the rail must be totally supported to achieve maximum loading.
The R52 Rail fitted with carrier has a height of 52mm and a width of 32mm. The R52 3 bearing carrier has an individual load capacity of 280N whilst the 5 bearing carrier is 400N. This is increased by adding additional carriers.
Order Codes:
CAR3 is a 3 bearing carrier
CAR5 is a 5 bearing carrier
D = Delrin (for silent use): S = Steel (for higher strength)
Available ex-stock, usually on a same day despatch, the rails are supplied undrilled and without end stops as standard. Upon customer request, we can manufacture these to drawing.
R52 Rails can be purchased online for global delivery by following this link to our web-shop
R52 Carriers can be purchased online for global delivery by following this link to our web-shop
4015.ADTS040 – ADTS-40