Sliding Systems has entered into a new distribution agreement with Regout Balance...
4013.4010D (13-45kg)
4013.4010D Monument Slide (13-45kg) Aluminium Telescopic Slide. Non-Locking
The 4010 Monument telescopic slide is manufactured from T6 aluminium, with hard anodization for extended life. The beam profile of 3/8”(9.5mm) makes it ideal for aircraft galley and monument applications. Stainless steel ball bearings in grade 316L further increase the corrosion resistance.
Standard lengths are available from 6” (152mm) to 26” (660mm) and feature a detachable inner beam for ease of fitting. A fully extended pair will support up to 45kg. The slides are light in weight (only 38g each at 450mm) and have standard hole positions, designed to be a drop in replacement for current aircraft interior telescopic slides.
Access all information by swiping the tabs below
Specification Details:
- Space Envelope Width: 9.5mm
- Height: 40mm
- Closed Length: 152-660mm
- Extension Length: 152-660mm
- Maximum Load Capacity: 13-45 kg/pair
- Number of beams: N/A
- Extension Type: Total
- Material: T6 Aluminium
- Vibration Resistance: 7
Profile:
Suitable For:
- AEROSPACE - Aircraft Seating
- CATERING - Products & Equipment
- DEFENCE - Airborne - Shipborne - Vehicles
- FURNITURE - Architecture & Sliding Units
- SPECIAL VEHICLES - Commercial & Response Vehicles
The 4010 Monument telescopic slide is manufactured from T6 aluminium, with hard anodization for extended life. The beam profile of 3/8”(9.5mm) makes it ideal for aircraft galley and monument applications. Stainless steel ball bearings in grade 316L further increase the corrosion resistance.
Standard lengths are available from 6” (152mm) to 26” (660mm) and feature a detachable inner beam for ease of fitting. A fully extended pair will support up to 45kg. The slides are light in weight (only 38g each at 450mm) and have standard hole positions, designed to be a drop in replacement for current aircraft interior telescopic slides.
There are no minimum order quantities and rapid manufacturing means lead times are minimal. Locking variants are also available, as well as bespoke lengths and drilling patterns if required. Manufactured for AS9100-D release at our Turin/Italy aerospace facility.
Code | Closed Length (mm) | Extension (mm) | Max Load Capacity (kg) |
|---|---|---|---|
| 4013.4010D.006 | 152mm | 152mm | 45kg |
| 4013.4010D.007 | 178mm | 178mm | 40kg |
| 4013.4010D.008 | 203mm | 203mm | 35kg |
| 4013.4010D.009 | 228mm | 228mm | 35kg |
| 4013.4010D.010 | 254mm | 254mm | 35kg |
| 4013.4010D.011 | 279mm | 279mm | 35kg |
| 4013.4010D.012 | 304mm | 304mm | 30kg |
| 4013.4010D.013 | 330mm | 330mm | 30kg |
| 4013.4010D.014 | 356mm | 356mm | 30kg |
| 4013.4010D.015 | 381mm | 381mm | 25kg |
| 4013.4010D.016 | 406mm | 406mm | 20kg |
| 4013.4010D.017 | 432mm | 432mm | 20kg |
| 4013.4010D.018 | 457mm | 457mm | 20kg |
| 4013.4010D.019 | 482mm | 482mm | 20kg |
| 4013.4010D.020 | 508mm | 508mm | 20kg |
| 4013.4010D.021 | 533mm | 533mm | 20kg |
| 4013.4010D.022 | 559mm | 559mm | 20kg |
| 4013.4010D.023 | 584mm | 584mm | 17kg |
| 4013.4010D.024 | 610mm | 610mm | 17kg |
| 4013.4010D.025 | 635mm | 635mm | 15kg |
| 4013.4010D.026 | 660mm | 660mm | 13kg |
Downloads Access
To download the CAD files and specifications for this product you need to be logged in.
Data Sheet - Metric -
Datasheet - Imperial -
4013.4010D - 152mm - 3D STEP File
4013.4010D length 152mm (6″)
4013.4014 - 178mm - 3D STEP File
4013.4010D length 178mm (7″)
4013.4010D - 203mm - 3D STEP File
4013.4010D length 203mm (8″)
4013.4010D - 229mm - 3D STEP File
4013.4010D length 229mm (9″)
4013.4010D - 254mm - 3D STEP File
4013.4010D length 254mm (10″)
4013.4010D - 279mm - 3D STEP File
4013.4010D length 279mm (11″)
4013.4010D - 305mm - 3D STEP File
4013.4010D length 305mm (12″)
4013.4010D - 330mm - 3D STEP File
4013.4010D length 330mm (13″)
4013.4010D - 356mm - 3D STEP File
4013.4010D length 356mm (14″)
4013.4010D - 381mm - 3D STEP File
4013.4010D length 381mm (15″)
4013.4010D - 406mm - 3D STEP File
4013.4010D length 406mm (16″)
4013.4010D - 432mm - 3D STEP File
4013.4010D length 432mm (17″)
4013.4010D - 457mm - 3D STEP File
4013.4010D length 457mm (18″)
4013.4010D - 483mm - 3D STEP File
4013.4010D length 483mm (19″)
4013.4010D - 508mm - 3D STEP File
4013.4010D length 508mm (20″)
4013.4010D - 533mm - 3D STEP File
4013.4010D length 533mm (21″)
4013.4010D - 559mm - 3D STEP File
4013.4010D length 559mm (22″)
4013.4010D - 584mm - 3D STEP File
4013.4010D length 584mm (23″)
4013.4010D - 610mm - 3D STEP File
4013.4010D length 610mm (24″)
4013.4010D - 635mm - 3D STEP File
4013.4010D length 635mm (25″)
4013.4010D - 660mm - 3D STEP File
4013.4010D length 660mm (26″)
Aerospace
Following thorough research in house and at our manufacturing facilities we can offer a slide which is particularly suited to aircraft seating. The full aerospace range is fitted with cross roller bearings, due avoid any effect of brinelling.
The 5220 Radial Slide (140-154kg/pair) is made from high strength aircraft allows which has be rigorously tested to outperform standard ball bearing models.
The T6 aircraft grade aluminium beams have milled race tracks for tolerance. The surface finish is black hardened anodised as standard, other finishes are available on request.
The cross-roller bearings are made from precision hardened steel and chromed rods, it is possible to fit them with Delrin if the project requires light weight, performing slides.
7075 -T6 aluminium provides a high strength material, commonly used in aircraft fittings with a Rockwell A hardness 53.5 and an ultimate tensile strength of 572 Mpa.
The 450mm length with a 480mm travel has been independently (cyclically and abuse) tested to 60,000 cycles with a 100kg load, passing all criteria for aircraft seating use.
Catering
Defence
Ground, marine and air defence vehicle applications such as equipment stowage, mountings for weapon systems and racks for electronic systems
Ship Borne
Applications can range from slide based storage systems, lockers and furniture, through rack mounted electronic components, and onto operational and weapon systems requiring linear movement. If required products manufactured from high grade stainless steel can be supplied offering highest levels of corrosion resistance and low magnetic signatures.
Vehicles
Slides and bespoke sub-assemblies for mounting electronic and other equipment including weapon components on vehicles ranging from lightly armoured personnel vehicles (radio and other electronic components) through to battlefield tanks (internal storage, ammunition handling, slide-out generators and workstations).
Furniture & Architecture
We are delighted to be able to advise our customers on the most diverse projects possible.
One day we could be talking to an ambitious DIY customer who wants to install a removable console tray in his game room and the next project could be a whole building interior refurbishment destined for micro flats. Whilst each project represents different challenges and requirements we are confident in finding a suitable slide or linear rail.
Standard furniture fittings will suit the Thomas Regout or Fulterer range of rolled steel slides and linear rail. Whereas high end architectural furniture design may call for aluminium drawer slides, such as the 8027/8028 or the aluminium T6 slide from our professional range.
To suit yacht interior design, we can supply Viadana chandlery and stainless steel 316L telescopic slides.
4013.4010D Enquiry
If you are unsure of which slide you require try using our custom enquiry page HERE
If you are unsure of which slide you require try using our custom enquiry page HERE
4014.130FL Enquiry
If you are unsure of which slide you require try using our custom enquiry page HERE
If you are unsure of which slide you require try using our custom enquiry page HERE
COMPANY
Sliding Systems,
Gledrid Industrial Park,
Chirk,
Wrexham,
LL14 5DG,
United Kingdom
Tel: +44 (0)1691 770303
FEEDBACK
We would like to hear from you with any feedback about our website or products.
Email us HERE
ABOUT US
Sliding Systems engineers have the experience to guide you through the selection process of choosing the right telescopic slide, linear rail or tilting drawer system. We have the widest selection of telescopic and drawer slides available, anywhere, from a few kilos to well over 4,000kg across multiple ranges specifically designed to anticipate almost every demand.
LATEST NEWS
© 2022 GSF Slides All rights reserved | Website by Arise Media
4015.ADTS040 – ADTS-40